Acura ZDX Key Fob Battery Remote Replacement (2010 – 2014)

FobBattery is an independent review site that prides itself on unbiased reviews. I am not affiliated with any manufacturers and do not accept paid reviews. When you buy through my links, I may earn a commission which helps me purchase more key fobs for testing. - Scott

The Acura ZDX is a mid-size luxury crossover that Acura says “blurs the distinction between coupe, sedan and sport utility vehicle.” This car uses 2 different key fobs, the “Flip” and the “Silver Sides” key fobs. Changing the internal battery in either of these devices is simple. Follow along to find out how.

For other Acura models, see our Acura key fob battery page.

MODELFOBYEARSBATTERYBUY BATTERY
ZDXFlip2010, 2011, 2012, 2013, 2014CR1616Check on Amazon
ZDXSilver Sides2010, 2011, 2012, 2013CR2032Check on Amazon

How to replace the Acura ZDX “Flip” key fob battery (2010, 2011, 2012, 2013, 2014)

Scroll down to see a full video tutorial or keep reading for a step by step guide.

What you will need:
• 1x CR1616 battery
• Precision screwdriver

Buy Small Screwdriver Set on Amazon

Locate the screw on the bottom of the key fob where the key ring is. Use a precision screwdriver to remove the screw. Next, with the key fob face-up, push up on the key ring until the section with the buttons comes free.

Now you will need to push down on one of the buttons to separate the face of the key fob from the batter housing underneath. Look to the right side of this piece and locate the small slot in the center. Insert a flat-head screwdriver into the slot and twist. The compartment will open revealing the battery. Use your screwdriver to gently pry the battery out.

Next, take a new CR1616 battery and push it into place face-down. Finally, reassemble the key fob and put the screw back in. Boom, you did it! Nice work, your key fob is ready to go.

Acura ZDX Key Fob Battery Replacement (2010 - 2014)

Buy CR 1616 Replacement Battery on Amazon

How to replace the Acura ZDX “Silver Sides” key fob battery (2010, 2011, 2012, 2013)

Scroll down to see a full video tutorial or keep reading for a step by step guide.

What you will need:
• 1x CR2032 battery
• Flat-head screwdriver

Start by removing the internal key from the key fob. On the bottom of the device, directly opposite the key hole is a small indentation. Insert a flat-head screwdriver into that indention and twist — this will open the device.

Now that you have access to the battery, simply use your tool to pry it out. Be gentle! Next, take your new CR2032 battery and click it into place face-up. Lastly, reattach the two halves of the device. All done, your key fob is as good as new! Nice work.

Acura ZDX Key Fob Battery Replacement (2010 - 2013)

Buy CR 2032 Replacement Battery on Amazon