No doubt, the key fob is far beyond just a gadget. Key fobs bring with them undeniable convenience. For instance, a key fob unlocks or locks your car remotely and can also start the engine. It allows quick access to keyless entry in 1-3 seconds.
Unfortunately, these key fobs work with batteries that are not built to last a lifetime. The battery usually dies after 2 or 3 years of use, thereby, needing a replacement. But worry not, this blog has all the guides you need for your Dodge charger key fob battery replacement.
For other Dodge models, see our Dodge key fob battery page.
How to Replace the Dodge Charger “Rounded” Key Fob Battery (2011-2021)
Scroll down to see a full video tutorial or keep reading for a step-by-step guide for your Dodge Charger key fob battery replacement.
What you will need:
1x CR2032 battery
Flat-head screwdriver
Step 1
The first step is to flip the key fob over. Now, pull the silver (release lever) switch on the back of the device to release the emergency key (also called the metal key).
Step 2
Next, look at the bottom of the key fob. Next to the keyhole, there is a slot. Insert a small flathead screwdriver into the slot and twist to separate the two halves of the device.
Step 3
From here, all you need to do is lift the battery out of its housing with your screwdriver. Do not rush this process to avoid damaging the circuit board.
Step 4
Now, take a new battery (CR2032) and slide it into place with the positive side facing down. Finally, click the two halves of the device back together and return the emergency key.
You’re done. Great job! Go ahead and start enjoying your new key fob battery.
How to Replace the Dodge Charger “Teardrop” Key Fob Battery (2008, 2009, 2010)
Scroll down to see a full video tutorial or keep reading the following steps on how to replace your Dode Charger key fob old battery.
What you will need:
1x CR2032 battery
A small flat-head screwdriver
Step 1
First, locate the seam between the two halves of the key fob (at the bottom of the device).
Step 2
Insert your flathead screwdriver into the seam, wiggling as you push. Once the tool is inside, twist until each back cover of the device pops open and separates.
Step 3
Now, carefully remove the rubber piece. That should give you access to the old battery. Next, use your finger or screwdriver to lift the battery out of its housing gently.
Step 4
Slide in your new CR2032 battery into place. Ensure the positive side is facing down.
Step 5
Finally, set the rubber buttons back on top of the key fob and click the front piece of plastic back into place.
Excellent work! You just changed the battery at home and saved yourself a trip to the dealership for their services.
Lock and unlock your vehicle door or push any button to confirm it’s working perfectly.
How to Replace the Dodge Charger “Fixed Key” Key Fob Battery (2006, 2007)
Replacing this key fob battery model is like a walk in the park. Scroll down to see a full video tutorial or keep reading for a step-by-step guide on Dodge charger key fob battery replacement.
What you will need:
1x CR2032 battery
Flat-head screwdriver
Step 1
Start by locating the small indentation on the bottom-left side of the key fob. Found it? Good.
Step 2
Now, gently insert your flathead screwdriver into the slot, and turn it like a key. Each back cover of the device will come apart. Keep them in a safe place.
Step 3
Next, carefully remove the rubber piece with the buttons on it. Done? You should be looking at the old battery now.
Step 4
Using your screwdriver, carefully remove the battery. Take a new CR2032 battery and slide it into place with the positive side facing down.
Step 5
The last thing – put the rubber piece back in place and click the two sides back together.
Everything’s done. Nice work! Time to start enjoying your keyless entry with your Dodge charger key fob again.
Do I have to reprogram my key fob if I change the battery?
Generally, it isn’t necessary to reprogram key fobs after changing batteries. Depending on where you are using the battery you can reinstall the battery and then use another device to replace the battery.
How much does it cost to replace a key fob battery?
A typical Dodge charger key fob battery costs $10. However, some fobs need 2 batteries. The good thing is, battery dealers often provide quick replacement services for free since the battery only needs a few seconds to recharge.
Conclusion
No more wondering how to replace your car Dodge Charger key fob batteries. Simply follow the above step-by-step instructions next time your Dodge charger batteries need replacement.
Note: If your remote Dodge charger key still doesn’t work after you replace batteries, call or visit a car dealership for professional help.
