Ford Ranger Key Fob Battery Remote Replacement 1995 – 2019

How do I replace my Ford Ranger key fob battery? If you’ve been asking this question then you’re in the right place.

In this blog, you will discover the simplest guide for your Ford Ranger key fob battery replacement.

A Little About Ford Ranger Key Battery

The Ford ranger has been in the Ford lineup of trucks since the mid-90s and is still in production today. It did have an 8-year gap though! Just came back recently. It has only had three different Ford fobs over the years. I guess truck people aren’t too fancy. Who knows?

Either way, follow the instructions below to replace your ford ranger key battery.

If you’re looking for other Ford fobs, check out our full Ford page of fob batteries here.

What battery does the Ranger fob need? CR2032

Model	Trims	Generation	Years	Key Fob Type	SubType	Rechargeable? Ease of change	Battery	Buy
Ranger	SuperCab, SuperCrew, T6	2nd	2019	Rounded Rectangle	Flip Key	No	CR2032	Check on Amazon
Ranger		1st	2011	Rounded Key		No	CR2032	Check on Amazon
Ranger		1st	1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010	Square Fob	Remote Only	No	CR2032	Check on Amazon

How to Replace the Battery in Your 2019 Ford Ranger Flip Key Fob

The flip key fob is what you get with the newest reboot of the Ranger. It has an internal 3v CR2032 coin battery. It is easy to change. Read on for the step-by-step guide on how to change the batteries in the Ford Ranger keys.

The accessories you will need:

• 1x CR2032 battery 3V batttery.

• A flathead screwdriver.

That’s how you replace a Ford ranger key fob battery 2019. Great work. Test your new key fob battery on your vehicle to ensure it works perfectly.

Here’s my video that shows the 1 tip you’ll need to do it really quickly…

This is the battery for this Ford Ranger flip remote key fob:

How to Replace the Ford Ranger 2011 Remote Key Fob Battery

This is the last fob before the newer revival of the Ranger. This key fob combo takes a simple CR2032 battery to replace. The main thing here is splitting the fob into two pieces to access the battery inside. With the steps below, you should have no trouble replacing the battery in the keys without a paid dealership service.

What you will need:

• 1x CR2032 battery

• A small flathead screwdriver

Step 1

The first thing to do is locate the slot at the edge of the key fob.

Step 2

Now, insert your flathead screwdriver into the slot and twist gently. Each cover of the key fob will come apart and you can see the dead battery.

Step 3

Next, remove the battery and replace it with a new CR2032 battery with the positive side facing you. Ensure the new battery you purchased is a match with the old one.

Step 4

Put together the two halves of the key fob and click. Now you have a brand-new key fob battery.

Test your newly installed battery to confirm it’s working: lock and unlock your vehicle doors. If that works fine, then you did it right.

Great job on the Ford Ranger key fob battery replacement!

Here’s my video that shows you how to do exactly what you just read

This is the battery for this Ford Ranger remote key fob:

How to Replace the Ford Ranger 1995-2010 Remote Key Fob Battery

This particular key fob uses two batteries. Scroll down to see the step-by-step guide for the Ford ranger key battery replacement.

What you will need:

• 2x CR2016 batteries

• A small flathead screwdriver

Step 1

Locate the notch at the bottom of the key fob. Twist to separate each cover of the key fob.

Step 2

You should be looking at the dead batteries now. Use a smaller or precision screwdriver to remove the two batteries.

Step 3

Next, install the new CR2016 batteries in place following the previous format and click.

Step 4

Finally, reassemble the two plastic parts and your key fob will start working perfectly again.

That was an easy Ford Ranger key fob battery replacement, wasn’t it?

Remember to lock and unlock the door of your Ford vehicles to confirm the functionality.

Frequently Asked Questions

How do I replace the key fob battery in my Ford ranger?

The first thing is to remove the internal key and separate the key fob into two halves. Remove the old battery and slide in the new CR2032. Click the two halves of the key fob back and you’re good to go. With time and consistent practice, you will realize changing your key fob battery is like a walk in the park.

What battery does a Ford Ranger key fob take?

Most Ford ranger models use a CR2032 battery. You can order yours on Amazon at affordable prices. Simply scroll up to find the link.

Do I need to reprogram my Ford ranger key battery after replacement?

No, you don’t always have to reprogram your key fob after replacing the battery. Nevertheless, if you performed any electronics or wiring services, then that’s more than just a battery replacement, meaning your key fob may need to be paired with your Ford vehicle again.

Bottom Line

Your key fobs enable easy access to your cars. However, key fobs with poor battery capacity make it impossible to open your trunk. That’s because the battery on the remote key fob controls its functionality. Simply put, a dead battery equals a dead key fob.

So, if you want to enjoy keyless entry for as long as you want without visiting the local dealer, then it’s imperative to learn how to change your remote key fob by yourself.

Luckily, the guides above give you all you need to know. Follow through to get your Ford vehicles key fobs up and running again!