Jeep Commander Key Fob Battery Remote Replacement (2006 – 2010)

The Jeep Commander was in production from 2005 to 2010. During this time, the Commander was Jeep’s only three-row seven-seater on the lineup.

For other Jeep models, see our Jeep key fob battery page.

MODELFOBYEARSBATTERYBUY BATTERY
CommanderTeardrop2008, 2009, 2010CR2032Check on Amazon
CommanderFixed Key2006, 2007CR2032Check on Amazon

How to replace the Jeep Commander “Teardrop” key fob battery (2008, 2009, 2010)

Scroll down to see a full video tutorial or keep reading for a step by step guide.

What you will need:

  • 1x CR2032 battery
  • Flat-head screwdriver

First, look to the bottom of the device. Notice the seam between the two halves of the key fob. Take your flathead screwdriver and carefully insert it into the seam, wiggling as you push. Once the tool is just inside, turn it like a key until the two halves of the device pop open.

Now, carefully remove the rubber piece (buttons). Next, use your finger or screwdriver to gently lift the battery out of its housing. Take a new CR2032 battery and click it into place positive side down. Now, just set the rubber buttons back on top like before and click the front piece of plastic back into place.

That’s all it takes. You just changed the battery at home and saved yourself a trip to the dealership. Nice work!

This is the battery for this Jeep Commander “Teardrop” key fob:

Amazon Basics 4 Pack CR2032 3 Volt Lithium Coin Cell Battery
  • One pack of (4) lithium coin cell batteries; CR2032 cell size
  • 8-year leak-free shelf life, ideal for watches, calculators, key fobs, Apple TV remotes, and other small electronics
  • Replacement for BR2032, DL2032, and ECR2032

How to replace the Jeep Commander “Fixed Key” key fob battery (2006, 2007)

Scroll down to see a full video tutorial or keep reading for a step by step guide.

What you will need:

  • 1x CR2032 battery
  • Flat-head screwdriver

Locate the small indentation on the bottom-left side of the key fob. Take a flathead screwdriver, insert it into this slot, and turn it like a key. The two halves of the device will come apart. Next, carefully remove the rubber piece with the buttons on it.

Now that you are inside, use your screwdriver to carefully remove the battery. Take a new CR2032 battery and click it into place positive side down. Finally, put the rubber piece back in place and click the face of the device back on. That’s all it takes, nice work!

This is the battery for this Jeep Commander “Fixed Key” key fob:

Amazon Basics 4 Pack CR2032 3 Volt Lithium Coin Cell Battery
  • One pack of (4) lithium coin cell batteries; CR2032 cell size
  • 8-year leak-free shelf life, ideal for watches, calculators, key fobs, Apple TV remotes, and other small electronics
  • Replacement for BR2032, DL2032, and ECR2032