Introduction
Replacing the battery in your Volvo S90 key fob is a quick and straightforward process. Whether your key fob is black, beige, or orange, the steps remain the same. In this guide, I’ll walk you through the process of replacing the battery in your key fob. You’ll only need one CR2032 battery, which you can purchase online through the provided link.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Required Materials
- One CR2032 battery
- Flathead screwdriver (or a coin)
Step-by-Step Battery Replacement Guide
Step 1: Open the Key Fob
Flip your key fob over to the bottom side. Locate the switch on the key ring part. Hold down the switch while pushing and pulling the part with the logo away from the bottom part. This action will release the back cover of the key fob.
Step 2: Remove the Back Cover
Inside, you’ll find another switch with a picture of a battery. Hold down this switch while pushing and pulling again to remove the back piece of plastic. Set this piece aside for later.
Step 3: Access the Battery Compartment
You’ll see a piece of plastic holding the battery in place. Use a coin or a flathead screwdriver to twist this plastic piece to the open position. The arrow on the plastic piece should align with the open arrow on the key fob.
Step 4: Remove the Old Battery
With the plastic piece in the open position, use your flathead screwdriver to gently pry off the plastic cover. This will reveal the battery. Use the flathead screwdriver again to pry the old battery out of its compartment. Dispose of the old battery properly.
Step 5: Insert the New Battery
Take your new CR2032 battery and ensure the positive side (marked with a plus sign) is facing up. Snap the battery into place. Reattach the plastic cover by aligning the arrow with the open arrow and then twisting it back to the closed position.
Step 6: Reassemble the Key Fob
Take the back piece of plastic you set aside earlier. Ensure the side with the open area aligns with the key ring part. Place it on top of the battery side and slide it up into position until it clicks into place.
Step 7: Final Assembly
Repeat the same process for the front piece of plastic. Ensure the open area aligns with the bottom of the device. Slide it into place and ensure it clicks back together.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
That’s all it takes to replace the battery in your Volvo S90 key fob. This new battery should last you a long time, ensuring your key fob remains functional. If you found this guide helpful, feel free to leave a like or a comment. For more tutorials on key fob battery replacements, visit our channel.
FAQs
What type of battery does the Volvo S90 key fob use?
The Volvo S90 key fob uses a CR2032 battery.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Can I use any brand of CR2032 battery?
Yes, any brand of CR2032 battery should work as long as it is the correct size.
How often should I replace the key fob battery?
The battery typically lasts several years, but it’s a good idea to replace it when you notice a decrease in range or responsiveness.
What if my key fob still doesn’t work after replacing the battery?
Ensure the battery is properly installed with the correct polarity. If it still doesn’t work, there may be an issue with the key fob itself.
Is it necessary to reprogram the key fob after replacing the battery?
No, you do not need to reprogram the key fob after replacing the battery.
Can I replace the battery myself or should I visit a dealership?
You can easily replace the battery yourself using this guide. There is no need to visit a dealership.
What tools do I need to replace the battery?
You will need a flathead screwdriver or a coin to open the battery compartment.