Introduction
Replacing the battery in your Chevrolet Captiva Sport key fob is a simple task that can be done at home. In this guide, I’ll walk you through the process step-by-step. All you need is a flathead screwdriver and a CR2032 battery.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Tools and Materials Needed
Before you begin, make sure you have the following items:
- Flathead screwdriver
- CR2032 battery
Step 1: Locate the Indentation
First, you need to find a small indentation along the seam of the key fob. This is where you’ll insert your flathead screwdriver. The indentation is subtle, but it’s enough to fit the tip of your screwdriver.
Step 2: Insert the Screwdriver
Once you’ve located the indentation, insert your flathead screwdriver into the slot. Wiggle it a bit until it feels secure. When the screwdriver is in place, give it a gentle twist. You should feel the key fob start to open.
Step 3: Open the Key Fob
After twisting the screwdriver, the key fob should start to come apart. Use your fingers to pull the two halves apart. Don’t worry if it falls apart; we need to access the circuit board anyway.
Step 4: Remove the Old Battery
With the key fob open, you’ll see a small metal housing holding the battery. Slide the old battery out of this housing. Dispose of the old battery properly.
Step 5: Insert the New Battery
Take your new CR2032 battery and make sure the positive side (the side with the plus sign and text) is facing up. Slide it into the metal housing.
Step 6: Reassemble the Key Fob
Now it’s time to put everything back together. Place the circuit board back into the rubber component, ensuring the battery is facing up. Then, take the front part of the key fob (the one with the holes) and place the rubber component with the circuit board inside it. Finally, click the back section of the key fob into place and squeeze the two halves together.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
That’s it! You’ve successfully replaced the battery in your Chevrolet Captiva Sport key fob. If you found this guide helpful, please let me know in the comments or by liking this post. Your feedback is important to us.
Additional Resources
If you need help with other key fobs, feel free to visit our website for more tutorials.
FAQs
Can I use any flathead screwdriver?
Yes, any regular flathead screwdriver will work for this task.
Where can I buy a CR2032 battery?
You can purchase a CR2032 battery on Amazon.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
What if my key fob doesn’t open easily?
Ensure you’re inserting the screwdriver in the correct indentation. If it’s still difficult, try using a bit more force, but be careful not to damage the key fob.
How do I dispose of the old battery?
Dispose of the old battery according to your local regulations. Many stores have battery recycling programs.
Why should the positive side of the battery face up?
The positive side needs to face up to ensure the key fob functions correctly. This is how the circuit is designed.
What if my key fob still doesn’t work after replacing the battery?
Double-check that the new battery is installed correctly. If it still doesn’t work, there may be another issue with the key fob, and you might need professional assistance.