Introduction
Replacing the battery in your Chevrolet Cruze key fob is a simple task that can be done at home in under five minutes. This guide will walk you through the process step-by-step, ensuring you have a fully functioning key fob in no time.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
What You Will Need
Before you start, gather the necessary tools and materials. You will need:
- Flathead screwdriver
- CR2032 battery
If you don’t have a CR2032 battery, you can easily purchase one on Amazon.
Removing the Internal Key
The first step is to remove the internal key from the key fob. Locate the silver button on the side of your device. Press and hold this button while pulling out the internal key. Keep this key handy as it will be used in the next step.
Opening the Key Fob
Now that you have the internal key, you will use it to pry open the back section of the key fob. Insert the key into the seam of the plastic cover, but be careful not to push it in too far. If you do, it will get trapped under a piece of plastic inside.
Find the spot where the key locks in at an angle. Apply upward pressure to pry the back section off. Once it is loose, you can pull it apart with your fingers. This may take a few tries, but you’ll get the hang of it quickly.
Removing the Old Battery
With the key fob open, locate the old battery. Use a flathead screwdriver to gently lift the battery out of its housing. You can also use any small tool or even your fingernail, but a screwdriver is usually the easiest option.
Dispose of the old battery properly. It’s important to handle batteries with care and follow local disposal regulations.
Inserting the New Battery
Take your new CR2032 battery and ensure the positive side (marked with a plus sign) is facing down. Place the battery into the housing and press it down until it clicks into place. Double-check that the battery is secure and properly oriented.
Once the new battery is in place, you can proceed to reassemble the key fob.
Reassembling the Key Fob
Align the two halves of the key fob and press them together until they click into place. Make sure everything is lined up correctly and that the key fob is fully closed.
Finally, insert the internal key back into its slot. Your key fob should now be fully functional with a new battery.
Conclusion
I hope this guide was helpful in showing you how to replace the battery in your Chevrolet Cruze key fob. If you have any questions or comments, feel free to leave them below. For more guides and information on key fobs for other makes and models, visit our website at FobBattery.com.
FAQ
How often should I replace my key fob battery?
Key fob batteries typically last 1-2 years, but this can vary based on usage. If your key fob starts to work intermittently or has a reduced range, it may be time to replace the battery.
Can I use any CR2032 battery?
Yes, any CR2032 battery will work. Just ensure it is a high-quality battery from a reputable brand.
What should I do with the old battery?
Dispose of the old battery according to local regulations. Many stores that sell batteries also offer recycling services.
Is it possible to damage the key fob while replacing the battery?
If you follow the steps carefully and don’t force any parts, you should be able to replace the battery without damaging the key fob.
What if my key fob still doesn’t work after replacing the battery?
If the key fob doesn’t work after replacing the battery, check to ensure the battery is properly installed. If it still doesn’t work, there may be an issue with the key fob itself, and you may need to consult a professional.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032