Introduction
Replacing the battery in your Nissan NV key fob is a simple task you can do at home. This guide will walk you through the steps needed to complete the process. You will only need a few basic tools and a new CR1620 battery.
- LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
- CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These authentic Panasonic lithium battery cells and packaging (in our “sunburst” package as shown) meet or exceed IEC 60086-4:2019; ANSI C18.3M Part 2:2024; CFR 16, Part 1700.20 and CFR 16, Part 1263 as required by Reese’s Law (Pub. L. 117-171, 15 U.S.C 2056e)
- LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored
Tools and Materials Needed
Before starting, gather the following tools and materials:
- Flathead screwdriver
- Small Phillips head screwdriver
- CR1620 battery
Step-by-Step Instructions
1. Remove the Phillips Head Screw
On the back of the key fob, locate the small Phillips head screw. Use your small Phillips head screwdriver to remove it. Set the screw aside carefully, as it is tiny and easy to lose.
2. Open the Key Fob
Insert a flathead screwdriver into the seam of the key fob. Twist the screwdriver to pry open the fob, revealing the battery inside. Be gentle to avoid damaging the plastic casing.
3. Remove the Old Battery
Once the fob is open, you will see the old CR1620 battery. Use the Phillips head screwdriver to gently pry the battery out. There are small openings in the plastic that you can use to get leverage. Work the battery out carefully.
4. Insert the New Battery
Take your new CR1620 battery and ensure the positive side (marked with a plus sign) is facing down. Place the battery into the compartment and press it down firmly to secure it.
5. Reassemble the Key Fob
Align the two halves of the key fob and snap them back together. Once the fob is closed, reinsert the Phillips head screw and tighten it. Your key fob should now be fully operational with the new battery.
- LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
- CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These authentic Panasonic lithium battery cells and packaging (in our “sunburst” package as shown) meet or exceed IEC 60086-4:2019; ANSI C18.3M Part 2:2024; CFR 16, Part 1700.20 and CFR 16, Part 1263 as required by Reese’s Law (Pub. L. 117-171, 15 U.S.C 2056e)
- LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored
Why Replace Your Key Fob Battery Yourself?
Replacing your key fob battery yourself can save you time and money. If you were to take your key fob to a dealership, they would likely charge a significant amount for this simple task. By doing it yourself, you only pay for the cost of the battery.
Additional Resources
For more information on key fob batteries, visit FobBattery. They offer a comprehensive guide on various key fobs, including the Nissan 370Z Key Fob Battery Replacement and others.
Frequently Asked Questions (FAQ)
What type of battery does the Nissan NV key fob use?
The Nissan NV key fob uses a CR1620 coin battery.
Where can I buy a CR1620 battery?
You can purchase a CR1620 battery on Amazon.
- LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
- CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These authentic Panasonic lithium battery cells and packaging (in our “sunburst” package as shown) meet or exceed IEC 60086-4:2019; ANSI C18.3M Part 2:2024; CFR 16, Part 1700.20 and CFR 16, Part 1263 as required by Reese’s Law (Pub. L. 117-171, 15 U.S.C 2056e)
- LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored
What tools do I need to replace the battery?
You will need a flathead screwdriver and a small Phillips head screwdriver.
How often should I replace my key fob battery?
It depends on usage, but typically every 1-2 years.
Can I damage my key fob by replacing the battery myself?
No, as long as you follow the instructions carefully, you should not damage your key fob.
What should I do if my key fob still doesn’t work after replacing the battery?
Ensure the battery is correctly installed with the positive side facing down. If it still doesn’t work, the issue might be with the key fob itself, and you may need to consult a professional.
Conclusion
Replacing the battery in your Nissan NV key fob is a straightforward process that can save you both time and money. With just a few tools and a new CR1620 battery, you can have your key fob working like new. For more guides and information, visit FobBattery.