Introduction
Replacing the battery in your Buick LaCrosse key fob is a simple task that can save you time and money. In this guide, I’ll walk you through the process step-by-step. No special tools are required, just a flathead screwdriver and a CR2032 battery.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Gather Your Tools and Materials
Before starting, make sure you have the necessary tools and materials on hand. This will make the process smoother and quicker.
- Flathead screwdriver
- CR2032 battery
You can purchase the CR2032 battery online.
Locate the Indentation
The first step is to find the small indentation on your key fob. This indentation is located near the key ring attachment. It’s a small space along the seam in the plastic.
Once you find it, insert your flathead screwdriver gently into this space. Be careful not to use too much force.
Open the Key Fob
With the screwdriver wedged in the indentation, twist gently. The key fob should start to come apart. At this point, you can use your fingers to pull the two halves apart completely.
Be cautious during this step to avoid damaging the plastic casing.
Remove the Old Battery
Now that the key fob is open, you have access to the battery. Use your finger or the flathead screwdriver to push the old battery out. Dispose of the old battery responsibly.
Insert the New Battery
Take your new CR2032 battery and ensure the positive side (the side with text) is facing up. Slide it into the battery compartment carefully.
Make sure it is seated properly to ensure good contact.
Reassemble the Key Fob
With the new battery in place, align the two halves of the key fob. Press them together until you hear a click, indicating that they are securely snapped together.
Double-check to make sure the key fob is fully closed.
Test the Key Fob
After reassembling, it’s a good idea to test the key fob to ensure it’s working correctly. Try locking and unlocking your car using the key fob buttons.
If it doesn’t work, you may need to reopen the fob and check the battery’s orientation.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
And that’s it! You’ve successfully replaced the battery in your Buick LaCrosse key fob. This simple task can extend the life of your key fob and save you from potential inconveniences.
If you found this guide helpful, feel free to leave a comment or give it a like. For more key fob tutorials, check out our other videos or visit our website at fobbattery.com.
FAQ
What tools do I need?
You will need a flathead screwdriver and a CR2032 battery.
Where can I buy the CR2032 battery?
You can purchase the CR2032 battery on Amazon.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
How do I know which side of the battery is positive?
The positive side of the CR2032 battery has text on it. Make sure this side is facing up when you insert it into the key fob.
What should I do if my key fob doesn’t work after replacing the battery?
If your key fob doesn’t work, reopen it and ensure the battery is correctly oriented with the positive side facing up. Also, make sure the fob is fully closed.
Can I use any other type of battery?
No, you should use a CR2032 battery. Other types may not fit or function correctly in your key fob.
Is it safe to use a metal tool to remove the old battery?
Yes, but be cautious. Using a metal tool like a flathead screwdriver is safe as long as you apply gentle pressure to avoid damaging the battery compartment.
How often should I replace the battery in my key fob?
Typically, a CR2032 battery in a key fob lasts 1-2 years. Replace it when you notice a decrease in range or responsiveness.
Can I replace the battery myself or should I go to a professional?
You can easily replace the battery yourself by following this guide. It’s a simple process that doesn’t require professional help.