Introduction
Replacing the battery in your Chevrolet Cruze key fob is a straightforward process. Whether you have the three-button or four-button version, this guide will walk you through the steps. All you need is a flathead screwdriver and a CR2032 battery. This process will take less than five minutes.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Gather Your Tools
The first step in replacing your key fob battery is gathering the necessary tools. You will need a flathead screwdriver and a CR2032 battery.
Locate the Opening
Turn your key fob over and look at the back. Near the metal key ring area, you will see a small opening. This is where you will insert your flathead screwdriver to remove the back cover.
Remove the Back Cover
Insert your flathead screwdriver into the small opening. Gently pry up the back cover using the screwdriver. Do not apply too much pressure, as this could damage the plastic. Once you have loosened the cover, you can remove it with your fingers.
Access the Battery
With the back cover removed, you will see the battery inside the key fob. There is a small plastic tab holding the battery in place. You will need to pry the battery out carefully.
Remove the Old Battery
Using your flathead screwdriver, gently pry the old battery out from under the plastic tab. Dispose of the old battery properly.
Insert the New Battery
Take your new CR2032 battery and ensure the positive side is facing up. Insert the battery into the slot and push it into place until it is secure.
Reattach the Back Cover
Once the new battery is in place, reattach the back cover. Press down until it clicks securely into place.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
You have successfully replaced the battery in your Chevrolet Cruze key fob. This simple process can save you time and money. If you found this guide helpful, please let us know in the comments or by liking this post. For more key fob guides, visit our website.
FAQ
What tools do I need?
You will need a flathead screwdriver and a CR2032 battery.
Where can I buy a CR2032 battery?
You can buy a CR2032 battery from Amazon.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
How long does the process take?
The entire process takes less than five minutes.
Can I use this guide for different key fob models?
This guide is specifically for the Chevrolet Cruze key fob (2016-2019). The process may be similar for other models, but it is best to consult a specific guide for your key fob.
What should I do with the old battery?
Dispose of the old battery properly according to your local regulations.
How do I know if the battery needs replacing?
If your key fob is not working as expected, it may be time to replace the battery. Signs include reduced range or intermittent function.
Is it safe to replace the battery myself?
Yes, it is safe and straightforward to replace the battery yourself by following this guide.