How to Replace the Key Fob Battery in a Ford Mustang (2010-2014)

Introduction

If you drive a Ford Mustang from 2010 to 2014, you may have encountered a dead key fob battery. Replacing this battery is straightforward. In this guide, I will walk you through the steps to ensure your key fob is back in working order.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

What You Need

Before you start, gather the necessary tools and materials. This ensures a smooth process.

  • CR2032 battery
  • Razor blade
  • Small flathead screwdriver

You can purchase the CR2032 battery on Amazon.com.

Step-by-Step Guide

Let’s dive into the process of replacing your key fob battery.

1. Identify the Key Fob Type

First, ensure you have the correct key fob. The 2010-2014 Ford Mustang uses a rounded smart key. Confirm this before proceeding.

2. Locate the Split Line

Examine the key fob closely. You will notice a line running around the middle, indicating where the key fob splits apart.

3. Score the Edges

Using a razor blade, carefully score the edges of the key fob. This helps in separating the two halves. Take your time to avoid damaging the fob.

4. Create Separation

Once scored, use a small flathead screwdriver to gently pry the two halves apart. Start at the top where you would attach a key ring. This spot usually offers the best leverage.

5. Open the Key Fob

Continue working your way around the key fob, gently prying it open. Be patient and avoid forcing it. The key fob will eventually pop open.

6. Remove the Battery Cover

With the key fob open, you will see a small battery cover. Remove this cover to access the battery compartment.

7. Replace the Battery

Remove the old CR2032 battery. Note the orientation of the positive side, which should be facing up. Insert the new battery with the positive side up.

8. Reassemble the Key Fob

Replace the battery cover and ensure it is securely in place. Align the two halves of the key fob and press them together until they snap shut.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Testing the Key Fob

After replacing the battery, test your key fob. Ensure all functions work correctly. If not, recheck the battery orientation and the assembly.

Common Issues and Solutions

Sometimes, you may encounter issues even after replacing the battery. Here are some common problems and their solutions.

Key Fob Not Working

If the key fob does not work, ensure the battery is installed correctly. Check the orientation and make sure the battery is seated properly.

Key Fob Falls Apart

If the key fob does not snap together securely, ensure all internal components are correctly aligned. Misalignment can prevent proper closure.

Battery Drains Quickly

If the new battery drains quickly, there may be an issue with the key fob itself. Consider consulting a professional for further diagnosis.

Maintaining Your Key Fob

Regular maintenance can extend the life of your key fob. Here are some tips to keep it in good condition.

  • Keep it dry
  • Avoid dropping it
  • Store it safely

Frequently Asked Questions (FAQ)

Here are some common questions about Ford Mustang key fob battery replacement.

What type of battery does the Ford Mustang key fob use?

The Ford Mustang key fob uses a CR2032 battery.

Where can I buy a CR2032 battery?

You can purchase a CR2032 battery on Amzon.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

How often should I replace the key fob battery?

Typically, the key fob battery lasts 1-2 years. Replace it when the key fob starts to malfunction.

Can I use a different type of battery?

No, always use a CR2032 battery. Other types may not fit or function correctly.

What should I do if the key fob still doesn’t work?

If the key fob still doesn’t work, consult your vehicle’s manual or seek professional assistance.

Conclusion

Replacing the key fob battery in your Ford Mustang is a simple task. With the right tools and this guide, you can do it in minutes. Always use the correct battery type and handle the key fob with care. If you encounter any issues, refer to the FAQ section or seek professional help. Enjoy the convenience of a fully functional key fob!

Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.