Tools and Materials Needed
Replacing the battery in your Chevrolet Sonic key fob is a simple task that you can do at home. You will need just a few items to get started:
- Flathead screwdriver
- CR2032 battery
If you don’t have a CR2032 battery on hand, you can easily find one on Amazon.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Step-by-Step Guide
Follow these steps to replace the battery in your Chevrolet Sonic key fob:
Step 1: Remove the Internal Key
Locate the button on the side of your key fob. Hold down this button and pull out the internal key. Keep this key handy as you will need it to open the fob.
Step 2: Open the Key Fob
Insert the internal key into the keyhole, but do not push it in too far. You are aiming to pry off the back section of the plastic casing. Be gentle and apply pressure until you feel the casing start to open. If you push the key in too far, it will get stuck, and the back piece will not move.
Step 3: Remove the Old Battery
Once the key fob is open, you will see the battery. If you have long nails, you might be able to pry it out with your fingers. Otherwise, use the flathead screwdriver to gently lift the battery out. Dispose of the old battery properly.
Step 4: Insert the New Battery
Ensure that your new battery is a CR2032. Place the battery into the slot with the positive side facing down. Snap it into place securely.
If you need to purchase a new battery, you can get one from Amazon.
Step 5: Reassemble the Key Fob
Align the two halves of the key fob carefully, making sure the button is properly seated in its housing. Squeeze the fob back together until it snaps into place. Finally, reinsert the internal key.
- 2 pack of Energizer 2025 Batteries, 3V Lithium Coin Batteries
- Performs in extreme temperatures from -22 F to 140 F
- Long-lasting choice for calculators, scales and remote batteries
Additional Tips
Here are some extra tips to make the process even smoother:
- Work on a clean, flat surface.
- Keep small parts away from children and pets.
- Test the key fob after replacing the battery to ensure it works.
Why Replace the Battery Yourself?
Replacing the battery yourself has several advantages:
- Saves time
- Saves money
- Quick and easy
You don’t need to visit the dealership or pay for professional services. With a few simple tools and a few minutes of your time, you can get your key fob working like new.
Common Issues and Solutions
Here are some common issues you might encounter and how to solve them:
Key Fob Not Opening
If the key fob doesn’t open, double-check the placement of the internal key. Ensure you are not pushing it in too far.
Battery Not Fitting
Make sure you are using a CR2032 battery and that the positive side is facing down. If it still doesn’t fit, check for any debris in the battery slot.
Key Fob Not Working After Replacement
If the key fob doesn’t work after replacing the battery, ensure the battery is installed correctly. Also, check if the fob is properly snapped back together.
Frequently Asked Questions (FAQ)
How long does the battery last?
The CR2032 battery typically lasts 1-2 years under normal usage conditions.
Where can I buy a CR2032 battery?
You can purchase a CR2032 battery from Amazon.
- 2 pack of Energizer 2025 Batteries, 3V Lithium Coin Batteries
- Performs in extreme temperatures from -22 F to 140 F
- Long-lasting choice for calculators, scales and remote batteries
Do I need any special tools?
No, you only need a flathead screwdriver and the new battery.
Can I use any other battery type?
No, you should only use a CR2032 battery for the Chevrolet Sonic key fob.
What if my key fob still doesn’t work?
If your key fob still doesn’t work after replacing the battery, you may need to reprogram it or check for other issues. Consult your vehicle’s manual or contact a professional for further assistance.
Conclusion
Replacing the battery in your Chevrolet Sonic key fob is a straightforward process that can save you time and money. With just a flathead screwdriver and a CR2032 battery, you can get your key fob back in working order in minutes. If you found this guide helpful, feel free to let me know in the comments or by giving this post a like. For more tutorials on key fob maintenance, visit our website here.