Introduction
Replacing the battery in your Chrysler 300 key fob is a simple process that can save you time and money. In this guide, I will walk you through the steps to replace the internal batteries in your key fob. This process is straightforward and requires only a few tools and a couple of new batteries.
- Used in heart rate monitors, keyless entry, glucose monitors, toys & games
- Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
- Reliable, dependable power
Tools and Materials Needed
Before you start, gather the necessary tools and materials. You’ll need two CR2016 coin batteries and a flathead screwdriver. You can purchase the batteries online from Amazon.com for a reasonable price.
- Two CR2016 coin batteries
- Flathead screwdriver
Step-by-Step Battery Replacement
Follow these steps to replace the batteries in your Chrysler 300 key fob:
Step 1: Locate the Slot
First, find the small slot on the side of the key fob. This slot is designed to help you open the key fob easily. Hold the key fob firmly in one hand and use your other hand to insert the flathead screwdriver into the slot.
Step 2: Open the Key Fob
With the screwdriver in the slot, gently twist it to start prying the key fob apart. Once you see a small gap, continue to twist the screwdriver to widen the opening. Be careful not to apply too much force to avoid damaging the key fob. Once the key fob starts to come apart, you can use your fingers to pull the two halves apart completely.
Step 3: Remove the Old Batteries
Inside the key fob, you’ll find two CR2016 batteries stacked on top of each other. To remove the first battery, use your fingernail or a small tool to carefully lift it out. Be cautious not to damage the metal components inside the key fob. For the second battery, you can push down on one side to make it pop up, then lift it out the same way.
Step 4: Insert the New Batteries
Take your new CR2016 batteries and make sure the positive side (the side with the information printed on it) is facing up. Insert the first battery into the key fob and press it down until it clicks into place. Then, stack the second battery on top of the first one, again making sure the positive side is facing up, and press it down until it clicks into place.
Step 5: Reassemble the Key Fob
Once the new batteries are in place, align the two halves of the key fob and press them together until they snap back into place. Make sure the key fob is securely closed and that there are no gaps between the halves.
- Used in heart rate monitors, keyless entry, glucose monitors, toys & games
- Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
- Reliable, dependable power
Conclusion
Replacing the battery in your Chrysler 300 key fob is a quick and easy process that you can do yourself. By following these steps, you can ensure that your key fob continues to work properly without the need for professional assistance. If you found this guide helpful, feel free to leave a comment or like. For more information on changing the batteries in key fobs from other makes and models, visit fobbattery.com.
FAQ
What type of battery does the Chrysler 300 key fob use?
The Chrysler 300 key fob uses two CR2016 coin batteries.
Do I need any special tools to replace the key fob battery?
All you need is a flathead screwdriver to open the key fob. The process is simple and does not require any special tools.
How often should I replace the key fob battery?
It depends on usage, but typically, key fob batteries last 1-2 years. If your key fob starts to work intermittently or stops working, it’s a good indication that the batteries need to be replaced.
Can I replace the key fob battery myself?
Yes, you can replace the key fob battery yourself by following the steps outlined in this guide. It is a simple process that takes only a few minutes.
Where can I purchase CR2016 batteries?
You can purchase CR2016 batteries online from Amazon. They are reasonably priced and readily available.
- Used in heart rate monitors, keyless entry, glucose monitors, toys & games
- Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
- Reliable, dependable power