Introduction
Welcome! In this guide, I will walk you through the process of replacing the battery in your Mazda 6 Hatchback flip key fob. This key fob model was used between 2006 and 2008 and requires a CR1620 coin battery. The procedure is straightforward, and with a few tools, you can easily get your key fob working like new.
- LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
- CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These authentic Panasonic lithium battery cells and packaging (in our “sunburst” package as shown) meet or exceed IEC 60086-4:2019; ANSI C18.3M Part 2:2024; CFR 16, Part 1700.20 and CFR 16, Part 1263 as required by Reese’s Law (Pub. L. 117-171, 15 U.S.C 2056e)
- LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored
Required Tools and Materials
Before we begin, make sure you have the following tools and materials ready:
- CR1620 coin battery
- Flathead screwdriver
- Precision screwdriver
These tools can be purchased online if you don’t already have them. The precision screwdriver set is especially useful for this task as it allows for safe and easy removal of the battery.
Step-by-Step Battery Replacement
Let’s dive into the step-by-step process of replacing the battery in your Mazda 6 Hatchback key fob.
Step 1: Flip Out the Key
The first step is to flip out the key. This will give you better access to the internal components of the key fob.
Step 2: Remove the Top Plastic Piece
Next, press up on the top piece of plastic. A flathead screwdriver can be used to hold the top part that will not be moving. Push up from inside the key area until you start to separate it.
Continue pushing up until you can insert your tool at the bottom and give it a little twist. The top plastic piece should come off easily.
Step 3: Access the Battery Compartment
With the top plastic piece removed, you now have access to the battery compartment. The battery is secured well, so you will need a tool to remove it.
Step 4: Remove the Old Battery
Using a precision screwdriver, locate the small arrow in the bottom right corner of the battery compartment. This arrow indicates where to insert your tool.
Insert the precision screwdriver into the bottom and push down while using a rocking motion. The old battery should pop out easily.
Step 5: Insert the New Battery
Take your new CR1620 battery and ensure the side with the text is facing down. This is the positive side, and it needs to be inserted correctly for the key fob to function.
Slide the battery up into the compartment and click it into place. Make sure it is secure before proceeding.
Step 6: Reassemble the Key Fob
With the new battery in place, you can now reattach the top plastic piece. Ensure everything lines up correctly and snaps back into place.
Your Mazda 6 Hatchback key fob is now ready to use with a fresh battery!
- LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
- CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These authentic Panasonic lithium battery cells and packaging (in our “sunburst” package as shown) meet or exceed IEC 60086-4:2019; ANSI C18.3M Part 2:2024; CFR 16, Part 1700.20 and CFR 16, Part 1263 as required by Reese’s Law (Pub. L. 117-171, 15 U.S.C 2056e)
- LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored
Tips for a Successful Battery Replacement
Here are some additional tips to ensure a smooth battery replacement process:
- Work in a clean, well-lit area
- Keep small parts organized
- Be gentle when prying open the key fob
- Double-check the battery orientation
Common Issues and Troubleshooting
If you encounter any issues during the battery replacement process, here are some common problems and solutions:
Key Fob Not Opening
If you have trouble opening the key fob, make sure you are applying enough pressure to the correct areas. Using the right tools, such as a flathead screwdriver, can make this step easier.
Battery Not Fitting
If the new battery does not fit properly, double-check the battery type. Ensure you are using a CR1620 coin battery and that it is oriented correctly with the positive side facing down.
Key Fob Not Working After Replacement
If the key fob does not work after replacing the battery, try the following:
- Recheck battery orientation
- Ensure battery is securely in place
- Inspect for any loose connections
Maintenance Tips for Your Key Fob
To extend the life of your key fob and ensure it remains in good working condition, consider these maintenance tips:
- Replace the battery annually
- Avoid exposing the key fob to extreme temperatures
- Keep the key fob clean and dry
- Store the key fob safely
Frequently Asked Questions (FAQ)
What battery does the Mazda 6 Hatchback key fob use?
The Mazda 6 Hatchback key fob uses a CR1620 coin battery.
How often should I replace the key fob battery?
It is recommended to replace the key fob battery every year to ensure optimal performance.
Can I use a different type of battery?
No, it is important to use the correct battery type, which is a CR1620 coin battery, to ensure compatibility and functionality.
What should I do if my key fob still doesn’t work after replacing the battery?
If your key fob does not work after replacing the battery, recheck the battery orientation, ensure it is securely in place, and inspect for any loose connections.
Where can I buy the CR1620 coin battery?
You can purchase the CR1620 coin battery online or at most electronics stores. Links to purchase are also provided in the guide.
- LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
- CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These authentic Panasonic lithium battery cells and packaging (in our “sunburst” package as shown) meet or exceed IEC 60086-4:2019; ANSI C18.3M Part 2:2024; CFR 16, Part 1700.20 and CFR 16, Part 1263 as required by Reese’s Law (Pub. L. 117-171, 15 U.S.C 2056e)
- LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored
Conclusion
Replacing the battery in your Mazda 6 Hatchback flip key fob is a simple and cost-effective way to maintain its functionality. By following the steps outlined in this guide, you can easily replace the battery yourself and ensure your key fob remains in good working order.
Thank you for following along, and I hope this guide has been helpful. If you have any further questions or need additional assistance, feel free to reach out!