Scion FR-S Key Fob Battery Replacement Guide (2013 – 2015)

Introduction

In this guide, I will walk you through the process of changing the battery in your Scion FR-S key fob. This key fob was used for Scion FR-S models from 2013 to 2015 and requires a CR1632 battery. Follow these simple steps to ensure your key fob is functioning correctly.

Tools and Materials Needed

Before we begin, make sure you have the following items:

• CR1632 battery
• Flathead screwdriver

Step 1: Remove the Internal Key

First, locate the button on the side of the key fob that says “push.” Press the top half of the button and pull out the internal key. Set the internal key aside for now.

Step 2: Open the Key Fob

Next, look for the keyhole and the small indentation next to it. Insert your flathead screwdriver into the indentation. Hold the device firmly and twist the screwdriver to separate the two halves of the key fob. Continue to twist and gently pull apart the halves.

Step 3: Access the Battery

Once the key fob is open, you will see the circuit board and the battery compartment. Carefully lift the circuit board from the sides to avoid touching delicate components. Set the circuit board aside to reveal the battery.

Using the flathead screwdriver, insert it into the small opening next to the battery and gently lift the battery out of its compartment.

Step 4: Insert the New Battery

Take your new CR1632 battery and ensure the positive side faces up. Slide the battery towards the metal component first, then click the top into place. Ensure all three plastic pieces are holding the battery securely.

Step 5: Reassemble the Key Fob

Place the circuit board back into its original position. Align the two halves of the key fob and press them together until they click into place. Finally, reinsert the internal key.

Conclusion

Your Scion FR-S key fob should now be functioning with the new battery. If you found this guide helpful, let us know in the comments or by liking this post. For more key fob battery replacement tutorials, visit our website or check out our other guides on YouTube.

FAQ

What type of battery does the Scion FR-S key fob use?

The Scion FR-S key fob uses a CR1632 battery.

How often should I replace the key fob battery?

The key fob battery should be replaced every 1-2 years or when you notice a decrease in functionality.

Can I use a different type of battery?

No, it is recommended to use only a CR1632 battery to ensure proper functionality.

What should I do if my key fob still doesn’t work after replacing the battery?

If your key fob still doesn’t work, ensure the battery is correctly installed. If the issue persists, consider consulting a professional or checking the key fob for other issues.

Is it safe to replace the battery myself?

Yes, replacing the battery is a simple process that can be done safely by following this guide.

Do I need any special tools?

All you need is a flathead screwdriver to open the key fob and replace the battery.

How can I dispose of the old battery?

Dispose of the old battery at a designated battery recycling location to ensure proper disposal and environmental safety.

Where can I buy a CR1632 battery?

You can purchase a CR1632 battery from online retailers such as Amazon or at most electronics stores.