How to Replace the Battery in a Buick Encore Key Fob (2014 – 2022)

Introduction

Are you struggling with a dead key fob for your Buick Encore? Replacing the battery might seem daunting, but it’s actually quite simple. In this guide, I’ll walk you through the process of replacing the battery in your Buick Encore key fob, specifically for models from 2014 to 2022.

All you need is a CR2032 coin battery, which you can easily purchase online. Let’s dive into the steps and get your key fob working again.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Understanding Your Key Fob

Before we start, it’s important to understand the layout of your key fob. Whether you have a three-button, five-button, or six-button key fob, the process remains the same. The key fob typically includes buttons for locking, unlocking, and other functions.

The key fob also contains a flip-out key, which is essential for opening the device to replace the battery. Make sure you have the correct model and follow along with these instructions.

Required Materials

To replace the battery in your Buick Encore key fob, you’ll need the following:

  • CR2032 coin battery
  • No additional tools are required

You can purchase the CR2032 battery online or at most electronics stores. I recommend ordering it from Amazon for convenience.

Step-by-Step Instructions

Now, let’s get into the step-by-step instructions to replace the battery in your key fob.

Step 1: Flip Out the Key

First, flip out the key from the key fob. This will give you access to the back of the device, where you can open it up.

Step 2: Remove the Back Cover

Turn the key fob over and locate the ridge inside where the key was. Hold the top piece of plastic and push up on the ridge. The back cover should come off easily. If you’re having trouble, try applying a bit more pressure, but it shouldn’t take much force.

Once the back cover is off, you’ll have access to the internal battery compartment.

Step 3: Remove the Old Battery

Inside the battery compartment, you’ll see the old CR2032 battery. There is a small piece of plastic holding it in place. Apply a little pressure to this piece of plastic, and the battery will click out.

Dispose of the old battery properly, as it can be harmful to the environment if not discarded correctly.

Step 4: Insert the New Battery

Take your new CR2032 battery and ensure the positive side (marked with a “+”) is facing up. Slide the battery into the compartment, making sure it is securely in place.

You should see the text on the battery facing up, indicating that it is correctly inserted.

Step 5: Reattach the Back Cover

Once the new battery is in place, align the back cover with the key fob and press it down until it clicks securely. Make sure all parts are sealed properly to ensure the key fob functions correctly.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Testing Your Key Fob

After replacing the battery, it’s essential to test your key fob to ensure it’s working correctly. Try locking and unlocking your car, and test any other functions available on your key fob.

If everything works as expected, congratulations! You’ve successfully replaced the battery in your Buick Encore key fob.

Common Issues and Troubleshooting

Sometimes, you might encounter issues even after replacing the battery. Here are some common problems and their solutions:

  • Key fob not working: Ensure the battery is inserted correctly.
  • Buttons not responding: Check if the back cover is securely attached.
  • Intermittent functionality: Try cleaning the battery contacts.

If problems persist, consider consulting a professional or checking for additional resources online.

FAQs

What type of battery does the Buick Encore key fob use?

The Buick Encore key fob uses a CR2032 coin battery.

Do I need any special tools to replace the battery?

No, you do not need any special tools to replace the battery. Everything can be done by hand.

How often should I replace the key fob battery?

The battery typically lasts 1-2 years, depending on usage. Replace it when you notice decreased functionality.

What should I do with the old battery?

Dispose of the old battery at a designated battery recycling center.

Where can I buy a CR2032 battery?

You can purchase a CR2032 battery online, at electronics stores, or automotive stores.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Conclusion

Replacing the battery in your Buick Encore key fob is a straightforward process that can save you time and money. By following these simple steps, you can ensure your key fob remains functional and reliable.

Remember, if you ever encounter issues with your key fob or need assistance with other devices, you can always refer to online resources or consult a professional.

Thank you for following along, and happy driving!

Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.