How to Replace the Key Fob Battery in a Ford Edge (2011-2015)

Introduction to Key Fob Battery Replacement

Replacing the battery in your Ford Edge key fob is a simple process that can save you time and money. The key fob used in Ford Edge models from 2011 to 2015 requires a CR2032 coin battery. In this guide, I’ll walk you through the steps to replace the key fob battery efficiently.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Gathering Your Tools

Before starting, it’s essential to have the right tools to make the process smoother. Here’s what you’ll need:

  • CR2032 coin battery
  • Valet key
  • Flat-head screwdriver
  • Paperclip (optional)

Having these tools on hand will ensure a seamless battery replacement process.

Removing the Valet Key

The first step is to remove the valet key from the key fob. The valet key is a small, removable key stored inside the fob. Follow these steps:

  1. Turn the key fob over to locate the latch on the back.
  2. Pull the latch towards you to release the valet key.
  3. Slide the valet key out of the key fob.

With the valet key removed, you can now access the internal components of the key fob.

Opening the Key Fob

Next, you’ll need to separate the key fob’s backing into two parts. This step requires some precision, so take your time. Here’s how to do it:

  1. Locate the seam running around the edge of the key fob.
  2. Identify two small notches near the top where the valet key was removed.
  3. Insert the flat-head screwdriver or valet key into these notches.
  4. Gently pry the backing apart, working your way around the key fob.

This will expose the internal circuit board and battery compartment.

Removing the Old Battery

With the key fob open, you can now remove the old battery. Follow these steps:

  1. Locate the battery compartment, which houses the CR2032 battery.
  2. Note the orientation of the battery, with the negative side facing up.
  3. Use a paperclip or small flat-head screwdriver to gently pry the battery out.

Be careful not to damage the metal casing surrounding the battery compartment.

Inserting the New Battery

Now it’s time to insert the new CR2032 battery. Ensure you follow these steps closely:

  1. Take the new CR2032 battery and identify the positive side, which has the lettering.
  2. Insert the battery with the positive side facing down, away from you.
  3. Ensure the battery engages with the metal piece in the compartment.

Proper orientation is crucial for the key fob to function correctly.

Reassembling the Key Fob

With the new battery in place, it’s time to reassemble the key fob. Here’s how:

  1. Align the backing with the front part of the key fob.
  2. Press the backing firmly until it snaps into place.
  3. Reinsert the valet key into its slot.

Your key fob should now be fully functional with the new battery installed.

Testing the Key Fob

After reassembling the key fob, it’s important to test it to ensure everything works correctly. Follow these steps:

  1. Stand near your Ford Edge.
  2. Press the buttons on the key fob to check if it locks, unlocks, and starts the car.

If the key fob functions properly, you’ve successfully replaced the battery.

Tips for Prolonging Battery Life

To extend the life of your key fob battery, consider these tips:

  • Avoid exposing the key fob to extreme temperatures.
  • Keep the key fob away from moisture.
  • Use the key fob regularly to prevent battery drain.

Following these tips can help you get the most out of your key fob battery.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Conclusion

Replacing the battery in your Ford Edge key fob is a straightforward process that can be done in minutes. By following the steps outlined in this guide, you can save time and avoid the hassle of a dead key fob. Remember to handle the key fob components with care and ensure the battery is correctly oriented. With a new CR2032 battery in place, your key fob should be as good as new.

Frequently Asked Questions

What type of battery does the Ford Edge key fob use?

The Ford Edge key fob uses a CR2032 coin battery.

How often should I replace the key fob battery?

It’s recommended to replace the key fob battery every 1-2 years, depending on usage.

Can I use a different type of battery?

No, it’s essential to use a CR2032 battery to ensure compatibility.

What should I do if the key fob doesn’t work after replacing the battery?

Ensure the battery is correctly oriented and the key fob is properly reassembled. If issues persist, consult a professional.

Is it safe to replace the key fob battery myself?

Yes, replacing the key fob battery is safe and straightforward if you follow the steps carefully.

Do I need any special tools to replace the key fob battery?

A flat-head screwdriver and a paperclip can be helpful but are not always necessary.

Can I replace the key fob battery without a flat-head screwdriver?

Yes, you can use the valet key to pry open the key fob if you don’t have a flat-head screwdriver.

Where can I purchase a CR2032 battery?

You can purchase a CR2032 battery online or at most electronics stores.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.