Introduction
In this guide, I will walk you through the steps to replace the battery in your Scion FR-S key fob. This process is straightforward and can be done at home. The key fob for the 2015 and 2016 Scion FR-S models uses a CR2016 battery.
By following these instructions, you can save time and money by avoiding a trip to the dealership. Let’s get started.
- Used in heart rate monitors, keyless entry, glucose monitors, toys & games
- Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
- Reliable, dependable power
Tools and Materials Needed
Before we begin, make sure you have the following items:
- CR2016 battery
- Flathead screwdriver
Step 1: Open the Key Fob
First, pick up your key fob and turn it over to the back. You will see a small indentation in one of the corners. This is where you will insert your flathead screwdriver.
Hold the key fob with the back facing up. Insert the screwdriver into the indentation and twist it gently. The back cover should pop off easily.
Step 2: Remove the Internal Components
Inside the key fob, you will see a small black box. Carefully lift this out. Be cautious, as there are small button pieces underneath that could fall out if the key fob is turned upside down.
Set the black box aside and keep the button pieces in place.
Step 3: Open the Black Box
Now, take the black box and look for the seam between the clear plastic and the black plastic. Insert your flathead screwdriver into this seam and twist to open it.
Repeat this process on the other side of the black box. After a few twists, you should be able to pull the box apart with your fingers.
Step 4: Remove the Old Battery
Once the black box is open, you will see the old CR2016 battery. To remove it, insert your flathead screwdriver between the battery and the rubber component holding it in place.
Gently pry the battery out. It may pop out quickly, so be careful.
Step 5: Insert the New Battery
Take your new CR2016 battery and ensure the positive side is facing up. Slide the battery into place, starting with the side that has the metal component.
Once the battery is lined up, press it down until it clicks into place. The battery should be secure and held by the two small plastic pieces on the top.
Step 6: Reassemble the Key Fob
Now that the new battery is in place, it’s time to reassemble the key fob. Start by clicking the black box back together.
Next, carefully lift the black box and set it back on top of the button pieces inside the key fob. Ensure everything is aligned correctly.
Finally, click the back cover of the key fob back into place. Your key fob should now be fully reassembled.
- Used in heart rate monitors, keyless entry, glucose monitors, toys & games
- Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
- Reliable, dependable power
Conclusion
Replacing the battery in your Scion FR-S key fob is a simple process that can be done at home with minimal tools. By following these steps, you can ensure your key fob continues to function properly.
If you found this guide helpful, please let us know in the comments or by giving this post a like. For more tutorials on changing key fob batteries for other makes and models, visit fobbattery.com.
FAQ
What type of battery does the Scion FR-S key fob use?
The Scion FR-S key fob uses a CR2016 battery.
Can I replace the key fob battery myself?
Yes, replacing the key fob battery is a simple process that can be done at home with a flathead screwdriver.
How often should I replace the key fob battery?
It is recommended to replace the key fob battery every 1-2 years, or when you notice a decrease in functionality.
Where can I buy a CR2016 battery?
You can purchase a CR2016 battery online, at most electronics stores, or at automotive supply stores.
- Used in heart rate monitors, keyless entry, glucose monitors, toys & games
- Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
- Reliable, dependable power
What should I do if my key fob still doesn’t work after replacing the battery?
If your key fob doesn’t work after replacing the battery, ensure the battery is installed correctly. If it still doesn’t work, there may be an issue with the key fob itself, and you may need to contact a professional.