Introduction
Welcome! Today, I want to guide you through the process of replacing the battery in your Cadillac SRX key fob for models from 2004 to 2006. This is a simple task that can save you time and money.
By following these steps, you can ensure your key fob continues to operate smoothly. Let’s dive right into it!
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Tools and Materials Needed
First, gather the necessary tools and materials to replace the key fob battery:
- CR2032 coin battery
- Flathead screwdriver
- Newspaper or cloth
You can purchase the CR2032 coin battery from various online retailers. I recommend buying it from Amazon for convenience.
Step 1: Open the Key Fob
Begin by locating the notch on the edge of the key fob. This is where you will insert the flathead screwdriver.
Gently insert the screwdriver into the notch and twist it to pry open the key fob. Be careful not to apply too much pressure to avoid damaging the plastic casing.
Once the key fob is open, you will see the battery compartment inside.
Step 2: Remove the Old Battery
Next, remove the old battery from the compartment. Use the flathead screwdriver to lift the battery out gently.
If the battery is stuck, you can use a pencil or another small object to help pry it out. Dispose of the old battery properly.
Step 3: Insert the New Battery
Take the new CR2032 coin battery and ensure the positive side is facing up. Insert the battery into the compartment, pressing it down until it clicks into place.
Double-check that the battery is secure and properly seated in the compartment.
Step 4: Reassemble the Key Fob
Now, it’s time to reassemble the key fob. Align the two halves of the key fob and press them together until they snap into place.
Make sure the key fob is securely closed and there are no gaps between the two halves.
Step 5: Test the Key Fob
Finally, test the key fob to ensure the new battery is working correctly. Stand near your vehicle and press the buttons on the key fob.
If the key fob functions properly, you have successfully replaced the battery. If not, double-check the battery placement and try again.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
Congratulations! You have now replaced the battery in your Cadillac SRX key fob. This simple process can extend the life of your key fob and save you from the inconvenience of a dead battery.
If you found this guide helpful, please consider sharing it with others who might benefit from it. Feel free to leave any questions or comments below. Happy driving!
Frequently Asked Questions (FAQ)
What type of battery does the Cadillac SRX key fob use?
The Cadillac SRX key fob uses a CR2032 coin battery.
Can I use a different type of battery?
It is recommended to use the CR2032 coin battery for optimal performance.
How often should I replace the key fob battery?
It is generally recommended to replace the key fob battery every 1-2 years or when you notice a decrease in performance.
What should I do if my key fob still doesn’t work after replacing the battery?
If your key fob still doesn’t work, double-check the battery placement and ensure it is properly seated. If the issue persists, consider consulting a professional.
Can I replace the key fob battery myself?
Yes, replacing the key fob battery is a simple task that you can do yourself with a few basic tools.
Do I need to reprogram the key fob after replacing the battery?
No, you do not need to reprogram the key fob after replacing the battery.
What should I do with the old battery?
Dispose of the old battery properly by following local regulations for battery disposal.
Where can I buy the CR2032 coin battery?
You can purchase the CR2032 coin battery from various online retailers, including Amazon.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032