Chevrolet Spark Key Fob Battery Replacement (2016 – 2021)

Introduction

Replacing the battery in your Chevrolet Spark key fob is a straightforward process that you can do at home. You don’t need to visit a dealership, and the task will take you less than five minutes. This guide will walk you through each step, ensuring you can replace the battery easily and efficiently.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Tools and Materials Needed

Before you start, make sure you have the following tools and materials:

  • Flathead screwdriver
  • CR2032 battery

If you don’t have a CR2032 battery, you can purchase one online. They are available for a few dollars on Amazon.

Step-by-Step Guide

Remove the Internal Key

First, locate the button on the left side of your key fob. Press this button and pull out the internal key. Keep this key handy, as you will use it to pry open the back of the key fob.

Pry Open the Key Fob

Insert the internal key into the keyhole at an angle. Be careful not to push too far in, as this could cause the key to get stuck under a piece of plastic inside the fob. You should feel the key lock into place. If you start pushing and see the seam in the plastic begin to open, you’re in the right spot. Pry the back open gently.

Remove the Old Battery

If you have long fingernails, you might be able to pop the battery out with your fingers. If not, use a flathead screwdriver or another key to lift the battery. Dispose of the old battery properly.

Insert the New Battery

Ensure the new CR2032 battery’s positive side faces down. Snap it into place securely. Double-check that it is seated correctly before proceeding.

Reassemble the Key Fob

Align the two halves of the key fob and squeeze them together until they snap into place. Finally, reinsert the internal key. Congratulations, you have successfully replaced your key fob battery!

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Additional Tips

  • Ensure the battery is the correct type.
  • Be gentle when prying open the fob.
  • Check the battery’s orientation.

Common Mistakes to Avoid

When replacing the battery, avoid these common mistakes:

  • Pushing the key too far in
  • Forcing the fob open
  • Inserting the battery upside down

Benefits of DIY Battery Replacement

By replacing the battery yourself, you save time and money. There’s no need to visit a dealership, and the process is quick and easy. Plus, you’ll gain a sense of accomplishment from doing it yourself.

Conclusion

Replacing the battery in your Chevrolet Spark key fob is simple and fast. With just a flathead screwdriver and a CR2032 battery, you can complete the task in under five minutes. Follow the steps outlined in this guide, and you’ll have a fully functioning key fob in no time.

FAQs

What type of battery do I need?

You need a CR2032 battery for the Chevrolet Spark key fob.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

How long does the replacement take?

The entire process takes less than five minutes.

Do I need any special tools?

A flathead screwdriver is the only tool required.

Can I use any CR2032 battery?

Yes, any standard CR2032 battery will work.

Is it necessary to visit a dealership?

No, you can replace the battery yourself at home.

What if I insert the battery incorrectly?

Ensure the positive side is facing down. If inserted incorrectly, the fob won’t function.

How can I tell if the key is in the right spot?

If the seam in the plastic starts to open, you’re in the right spot.

What should I do with the old battery?

Dispose of the old battery properly, following local regulations.

Final Thoughts

Replacing the battery in your Chevrolet Spark key fob is a quick and easy task that anyone can do. By following this guide, you’ll save time and money while ensuring your key fob is always ready to go. Happy DIYing!

Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.