Nissan Rogue Key Fob Battery Replacement (2014 – 2020)

Introduction

Replacing the battery in your Nissan Rogue key fob doesn’t have to be a daunting task. In fact, with the right tools and a bit of guidance, you can complete this task in just a few minutes. This guide will walk you through the process step-by-step.

Sale
Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

What You Will Need

Before you start, make sure you have the following items:

  • CR2032 coin battery
  • Flathead screwdriver

You can easily find the CR2032 battery online. For convenience, here’s a link to purchase the battery on Amazon.

Step-by-Step Guide

Locate the Opening

The first step is to find the opening on the bottom of your key fob. This is where you will insert your flathead screwdriver.

Make sure your screwdriver is not too large or too small. It should fit snugly into the opening.

Insert and Twist

Once you have your screwdriver in place, push it down and twist. You will need to use some force to open the key fob.

If the key fob doesn’t open immediately, you can use your fingers to pry it apart gently. Alternatively, continue working the screwdriver around the opening until it loosens.

Remove the Old Battery

After opening the key fob, locate the battery. Use the flathead screwdriver to get under the battery from the large empty space and gently lift it up.

Insert the New Battery

Take your new CR2032 battery and make sure the positive side (marked with a plus sign) is facing down. Place it into the slot, pushing it towards the metal component first and then snapping it into place.

Ensure the battery sits flush and flat in the compartment. If it sticks up, adjust it until it fits properly.

Reassemble the Key Fob

Line up the two halves of the key fob and squeeze them together. You will need to apply some pressure to snap it back into place.

Go around the edges to make sure the key fob is fully closed and secure.

Sale
Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Common Questions

How often should I replace the battery?

Typically, a key fob battery lasts between 2 to 3 years. If you notice a decrease in range or if the fob stops working, it’s time to replace the battery.

What if my key fob still doesn’t work?

If replacing the battery doesn’t solve the issue, there may be other problems with the key fob. Check for any visible damage or consider consulting a professional.

Can I use a different type of battery?

It is recommended to use a CR2032 battery as specified. Using a different type could result in improper functioning or even damage to your key fob.

Conclusion

Replacing the battery in your Nissan Rogue key fob is a simple task that can save you time and money. With just a CR2032 battery and a flathead screwdriver, you can have your key fob working like new in no time.

If you found this guide helpful, feel free to share it with others or leave a comment below. For more guides and information, visit our website at FobBattery.com.

Additional Resources

For more detailed guides and videos on key fob maintenance, consider subscribing to our YouTube channel. We cover a wide range of vehicles and provide step-by-step instructions for various key fob models.

Check out other resources:

FAQs

Is it safe to replace the key fob battery myself?

Yes, it is safe. Just follow the steps carefully and ensure you use the correct battery type.

Do I need to reprogram the key fob after changing the battery?

No, replacing the battery does not require reprogramming the key fob.

What tools do I need?

You only need a flathead screwdriver and a CR2032 battery.

Can I use a different size screwdriver?

It’s best to use a screwdriver that fits the opening snugly to avoid damaging the key fob.

How do I know if the battery is installed correctly?

The positive side should be facing down. Ensure the battery sits flush in the compartment.

What if the key fob still doesn’t work after replacing the battery?

Check for visible damage or consider consulting a professional if the problem persists.

Where can I buy a CR2032 battery?

You can find CR2032 batteries at most electronics stores, supermarkets, or online.

Sale
Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.