Introduction
Replacing the battery in your Ram 2500 key fob is a simple task that you can do at home. In this guide, I will walk you through the steps to change the battery in a key fob used between 2010 and 2019. This process is straightforward and only requires a flathead screwdriver and a CR2032 battery.
By following these steps, you’ll save time and money by not having to visit a dealership or a professional locksmith. Let’s get started!
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Tools and Materials Needed
Before you begin, make sure you have the following tools and materials:
- Flathead screwdriver
- CR2032 battery
If you don’t have a CR2032 battery, you can easily purchase one online. I recommend buying it from Amazon for just a couple of bucks. Here is the link to the battery.
Step-by-Step Battery Replacement Guide
Step 1: Locate the Seam and Indentation
First, take a close look at your key fob. Locate the key ring and follow the seam along the edge until you find a small indentation. This indentation is where you will insert your flathead screwdriver.
Step 2: Insert the Screwdriver
Next, carefully insert the flathead screwdriver into the indentation. Gently wiggle it until it fits securely in place. Once the screwdriver is in, twist it like you would a key. This action will create a small opening along the side of the key fob.
Step 3: Open the Key Fob
With the opening created, you can now continue to twist the screwdriver or use your fingers to pull apart the key fob. Be gentle to avoid damaging any internal components.
Step 4: Remove the Buttons and Circuit Board
Once the key fob is open, carefully remove the buttons. Beneath the buttons, you will find the circuit board. Lift the circuit board to reveal the old CR2032 battery.
Step 5: Replace the Battery
Take the old battery out and dispose of it properly. Now, take your new CR2032 battery and place it in the slot with the positive side facing down. Ensure it clicks into place securely.
Step 6: Reassemble the Key Fob
With the new battery in place, put the circuit board back on top. Make sure it sits firmly in its position. Then, reattach the buttons and snap the key fob halves back together. Ensure everything clicks into place properly.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
And that’s it! You’ve successfully replaced the battery in your Ram 2500 key fob. This simple process can be done in just a few minutes, saving you a trip to the dealership.
I hope you found this guide helpful. For more information on how to change the battery in key fobs from various makes and models, feel free to check out our other videos on YouTube or visit our website at fobbattery.com.
FAQ
What type of battery does the Ram 2500 key fob use?
The Ram 2500 key fob uses a CR2032 battery.
How often should I replace the key fob battery?
It’s recommended to replace the battery every 1 to 2 years, depending on usage.
Can I use a different type of battery?
No, you should use a CR2032 battery as specified for optimal performance.
Do I need any special tools to replace the battery?
No, you only need a flathead screwdriver to open the key fob and replace the battery.
Is it safe to replace the battery myself?
Yes, replacing the battery yourself is safe and straightforward if you follow the steps carefully.
What should I do with the old battery?
Dispose of the old battery properly by taking it to a recycling center or a place that accepts battery disposals.
Will replacing the battery affect the key fob’s programming?
No, replacing the battery will not affect the key fob’s programming. It will continue to work as usual.
Where can I buy a CR2032 battery?
You can purchase a CR2032 battery online on websites like Amazon or at local electronics stores.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032