Introduction
Changing the battery in your Chrysler PT Cruiser key fob is a simple task that you can do at home. This guide will walk you through the steps to replace the battery for key fobs used between 2006 and 2010. The process is straightforward and requires minimal tools. Follow this guide, and you’ll have a functioning key fob in no time.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Tools and Materials Needed
- Flathead screwdriver
- CR2032 battery
You can easily find a CR2032 battery online. For convenience, here’s a link to purchase it on Amazon.
Step-by-Step Guide
Locate the Slot
First, find the small slot on your key fob. This is where you will insert your flathead screwdriver to open the fob. The slot is typically located on the side of the key fob.
Open the Key Fob
Insert the flathead screwdriver into the slot. Turn the screwdriver like a key to create a small separation in the fob. Once you have a gap, work your way down the side by twisting the screwdriver until the fob comes apart.
Remove the Rubber Part
Inside the fob, you will see a rubber piece sitting on top of the battery. Carefully remove this rubber part and set it aside. This will give you access to the battery.
Remove the Old Battery
Using the flathead screwdriver, gently get under the old CR2032 battery and pull it up. The battery should come out easily. Make sure to dispose of the old battery properly.
Insert the New Battery
Take your new CR2032 battery and ensure the positive side is facing down. Click it into place. The battery should fit snugly.
Reassemble the Key Fob
Place the rubber part back on top of the new battery. Align the two halves of the key fob and press them together until they click securely. Ensure everything is tight and in place.
Testing Your Key Fob
Once you’ve replaced the battery and reassembled the key fob, test it to make sure it works. If it doesn’t, double-check that the battery is installed correctly and that the fob is securely closed.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
Replacing the battery in your Chrysler PT Cruiser key fob is a quick and easy task. By following these steps, you can save yourself the time and money of going to a professional. Enjoy your newly functioning key fob!
Frequently Asked Questions (FAQ)
What type of battery does the key fob use?
The key fob uses a CR2032 battery.
Do I need any special tools?
No special tools are required. A flathead screwdriver will suffice.
How long does the replacement process take?
The entire process takes about 5-10 minutes.
Is it safe to replace the battery myself?
Yes, replacing the battery yourself is safe and straightforward.
What should I do if the key fob doesn’t work after replacement?
Double-check the battery installation and ensure the fob is securely closed.
Where can I buy a CR2032 battery?
You can purchase a CR2032 battery on Amazon.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Can this guide be used for other key fobs?
This guide is specific to Chrysler PT Cruiser key fobs from 2006-2010.
If you found this guide helpful, feel free to leave a comment or give us a like. For more information on key fob battery replacements, visit fobbattery.com.