Introduction
Owning a Ford Edge from the years 2007 to 2015 means you likely have a key fob that will eventually need a battery replacement. This guide will walk you through the simple steps needed to replace the battery in your Ford Edge key fob.
The process is straightforward and requires only a few tools. By following these steps, you can save time and avoid a trip to the dealership.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Tools and Materials Needed
Before you begin, gather the necessary tools and materials. The main item you will need is a new CR2032 coin battery. Additionally, having a flathead screwdriver or another key can make the process easier.
- CR2032 coin battery
- Flathead screwdriver
- Optional: Another key
Step-by-Step Guide
Step 1: Identifying the Key Fob
The first step is to locate the key fob for your Ford Edge. This particular key fob was used in models from 2007 to 2015. Inspect the key fob carefully to familiarize yourself with its structure.
Step 2: Finding the Notch
Next, you need to find the notch that will allow you to separate the key fob into two pieces. This notch is located at the upper right corner of the key fob when you are looking at it directly.
Once you have located the notch, you can use a flathead screwdriver or another key to gain leverage. Insert the tool into the notch and twist gently to create separation between the two pieces.
Step 3: Separating the Key Fob
After creating some separation in the notch, you can also use the area where the keyring attaches to further pry apart the two pieces. This step may require some effort, but be patient and careful to avoid damaging the key fob.
Once the key fob is separated, you will see the internal components. One side will have a small rubber piece covering the battery. This rubber piece helps keep the battery in place.
Step 4: Removing the Old Battery
Carefully remove the rubber piece to expose the battery. The battery used in the Ford Edge key fob is a CR2032 coin battery. Flip the key fob over, and the old battery should fall out easily.
Step 5: Inserting the New Battery
Take your new CR2032 coin battery and ensure the positive side, marked with a plus sign and letters, is facing you. Place the new battery into the slot where the old battery was located.
Make sure the battery is seated correctly and securely to ensure proper functionality of the key fob.
Step 6: Reassembling the Key Fob
After inserting the new battery, replace the rubber piece over the battery if you had removed it. This will help keep the battery in place.
Carefully align the two pieces of the key fob and press them together until they snap back into place. Ensure that all edges are securely connected and that there are no gaps.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Common Issues and Troubleshooting
While replacing the battery in your key fob is generally straightforward, you may encounter a few common issues. Here are some troubleshooting tips:
- Difficulty separating the key fob: Ensure you are applying gentle pressure and using the notch and keyring area for leverage.
- Battery not staying in place: Make sure the rubber piece is properly positioned over the battery.
- Key fob not working after battery replacement: Double-check that the battery is inserted with the positive side facing up and that the key fob is securely reassembled.
Conclusion
Replacing the battery in your Ford Edge key fob is a simple and cost-effective task. By following these steps, you can ensure your key fob remains functional and avoid unnecessary trips to the dealership.
Remember to handle the key fob and battery with care to avoid damage. With a new CR2032 coin battery, your key fob should work like new.
Frequently Asked Questions (FAQ)
What type of battery does the Ford Edge key fob use?
The Ford Edge key fob uses a CR2032 coin battery.
How often should I replace the key fob battery?
It depends on usage, but typically every 1-2 years.
What should I do if my key fob still doesn’t work after replacing the battery?
Double-check the battery orientation and ensure the key fob is properly reassembled. If it still doesn’t work, consult your dealership.
Can I use any brand of CR2032 battery?
Yes, any reputable brand of CR2032 battery should work.
Is it safe to replace the battery myself?
Yes, replacing the battery is safe and straightforward if you follow the steps carefully.
Do I need any special tools to replace the battery?
A flathead screwdriver or another key can help, but no special tools are required.
What if the key fob is damaged during the process?
If the key fob is damaged, consult your dealership for a replacement.
Where can I purchase a CR2032 battery?
You can purchase a CR2032 battery at most retail stores or online.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032