Introduction
Changing the battery in your Toyota Corolla key fob is a straightforward process. You don’t need to be a tech expert to do it. In this guide, I will show you how to replace the battery in your key fob for the 2010, 2011, 2012, and 2013 models.
All you need is a flathead screwdriver and a CR1632 battery. If you prefer to buy the battery online, I’ve included a link to purchase it conveniently from Amazon.
- IN THE BOX: 4-pack of CR1632 3-volt lithium coin cell replacement batteries for small electronic devices
- DEVICE COMPATIBLE: Ideal for watches, calculators, games, medical devices, and more
- LONG LASTING: Long-lasting, reliable battery life; performs in extreme temperatures
Gather Your Tools
Before you start, ensure you have the necessary tools. You will need:
- Flathead screwdriver
- CR1632 battery
These items are readily available. If you don’t have a CR1632 battery, you can find one online for a few dollars.
Remove the Internal Key
The first step is to remove the internal key from the fob. Look at the side of the key fob and find a button labeled “push.” Press and hold this button while pulling out the internal key.
Set the internal key aside. You will see a keyhole and a smaller indentation in the plastic, perpendicular to the keyhole.
Open the Key Fob
To open the key fob, insert the flathead screwdriver into the smaller indentation. Hold the device loosely in your hand and twist the screwdriver. This action will crack open the key fob.
Once the key fob is open, set it aside. You will see a small circuit board inside. The battery is located under this circuit board.
Remove the Circuit Board
To access the battery, you need to remove the circuit board. You can either knock it out gently or use the screwdriver to lift it from the corner where there is a small space.
Be careful while lifting the circuit board to avoid damaging any components.
Replace the Battery
Now that you have access to the battery, use the flathead screwdriver to pry it out from the top corner. Place your finger on the battery to prevent it from popping out.
Once the old battery is removed, take your new CR1632 battery. Ensure the positive side is facing up when you insert it into the key fob.
Click the new battery into place. Make sure it is secure and properly aligned.
Reassemble the Key Fob
With the new battery in place, it’s time to reassemble the key fob. Start by placing the circuit board back into its original position. Ensure it is seated correctly.
Next, align the two halves of the key fob and press them together until they click into place. Make sure the edges are flush and the fob is securely closed.
Finally, reinsert the internal key into the key fob. Your key fob is now ready to use with the new battery.
- IN THE BOX: 4-pack of CR1632 3-volt lithium coin cell replacement batteries for small electronic devices
- DEVICE COMPATIBLE: Ideal for watches, calculators, games, medical devices, and more
- LONG LASTING: Long-lasting, reliable battery life; performs in extreme temperatures
Conclusion
Replacing the battery in your Toyota Corolla key fob is a simple process that can save you time and money. Instead of going to a dealership, you can do it yourself at home with minimal tools.
If you found this guide helpful, let me know in the comments or give this blog a like. For more tutorials on changing key fob batteries for various makes and models, check out our other guides.
Frequently Asked Questions (FAQ)
What type of battery does the Toyota Corolla key fob use?
The Toyota Corolla key fob uses a CR1632 battery.
Can I use a different type of battery?
No, it’s important to use the specified CR1632 battery to ensure proper functionality of your key fob.
Do I need any special tools?
You only need a regular flathead screwdriver to open the key fob and replace the battery.
How often should I replace the key fob battery?
Typically, you should replace the battery every 1-2 years, depending on usage.
Is it safe to replace the battery myself?
Yes, replacing the battery yourself is safe and straightforward. Just follow the steps outlined in this guide.
What if my key fob still doesn’t work after replacing the battery?
If your key fob doesn’t work after replacing the battery, ensure the battery is properly installed with the positive side facing up. If it still doesn’t work, consult your vehicle’s manual or contact a professional.
Can I replace the battery without opening the key fob?
No, you need to open the key fob to access and replace the battery.
Where can I buy a CR1632 battery?
You can purchase a CR1632 battery online from retailers like Amazon.
- IN THE BOX: 4-pack of CR1632 3-volt lithium coin cell replacement batteries for small electronic devices
- DEVICE COMPATIBLE: Ideal for watches, calculators, games, medical devices, and more
- LONG LASTING: Long-lasting, reliable battery life; performs in extreme temperatures