Introduction
Replacing the battery in your Ram 5500 key fob is a simple task that can save you time and money. This guide will walk you through the process step-by-step, ensuring that your key fob is back to working condition in no time. The Ram 5500 key fob, used from 2019 to 2021, requires a CR2450 battery. Let’s dive into the details.
- Pack of 2 batteries
- Lithium coin batteries for watches and electronic devices
- Has a power of 3 volts
Tools You Will Need
- CR2450 battery
- Precision screwdriver or flathead screwdriver
Step-by-Step Guide
Step 1: Remove the Internal Key
First, locate the button on your key fob that allows you to remove the internal key. Press this button to release the key. This will make it easier to access the back part of the key fob.
Step 2: Remove the Back Part of the Key Fob
The back part of the key fob is a thin, flexible piece of plastic. To remove it, you will need a precision screwdriver. If you don’t have one, a flathead screwdriver will also work, although it may be a bit more challenging.
Step 3: Pry Open the Key Fob
There are two holes on the key fob where you will insert the screwdriver. Start with the left hole. Insert the screwdriver slightly and lift up until you hear a pop. This indicates that the left side is now free.
Next, move to the right hole and repeat the process. Insert the screwdriver, lift up, and the entire back part of the key fob should now come off.
Step 4: Remove the Old Battery
Once the back part is removed, you will see the old CR2450 battery. Use your fingernail or the screwdriver to gently pull out the old battery. Be careful not to damage any internal components.
Step 5: Insert the New Battery
Take your new CR2450 battery and ensure that the positive side is facing up. Slide it into the battery compartment and push it up into place. Make sure it is securely positioned.
Step 6: Reattach the Back Part
Now, take the back part of the key fob and click it back into place. Ensure that all sides are securely fastened. Your key fob should now be as good as new.
- Pack of 2 batteries
- Lithium coin batteries for watches and electronic devices
- Has a power of 3 volts
Tips and Tricks
- Always have a spare CR2450 battery on hand.
- Use a precision screwdriver for easier access.
- Be gentle to avoid damaging the key fob.
Common Mistakes to Avoid
When replacing the battery, avoid using excessive force as this can damage the key fob. Also, ensure that the new battery is inserted with the correct polarity to prevent malfunction.
Why Battery Replacement is Important
Replacing the battery in your key fob is crucial for several reasons. First, it ensures that your key fob functions correctly, allowing you to lock and unlock your vehicle with ease. Second, it prevents potential issues that could arise from a dead or weak battery, such as being locked out of your car.
FAQs
Q: How often should I replace the key fob battery?
A: It’s recommended to replace the battery every 1-2 years.
Q: Can I use any CR2450 battery?
A: Yes, any CR2450 battery should work fine.
Q: What if my key fob still doesn’t work after replacing the battery?
A: Ensure the battery is correctly installed and check for any damage.
Q: Where can I buy a CR2450 battery?
A: You can purchase them online or at most electronics stores.
- Pack of 2 batteries
- Lithium coin batteries for watches and electronic devices
- Has a power of 3 volts
Conclusion
Replacing the battery in your Ram 5500 key fob is a straightforward process that can be done in just a few minutes. With the right tools and a little patience, you can save yourself a trip to the dealership and ensure that your key fob is always in top working condition.
For more information on key fob battery replacements and other related topics, feel free to explore our other guides and videos. Your vehicle’s key fob is an essential tool, and keeping it in good condition is crucial for your convenience and security.