Introduction
In this tutorial, I will show you how to replace the internal battery of your Cadillac XT5 key fob at home. This process is straightforward and does not require any special tools. All you need is a CR2032 battery, which you can easily purchase online.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Materials Needed
- CR2032 battery
- Flathead screwdriver (optional)
- Pen or pencil (optional)
Step-by-Step Guide
Step 1: Remove the Internal Key
First, look at the bottom right of your key fob. You will see a small button.
Hold this button down and pull out the internal key.
Keep the key handy, as you will need it for the next step.
Step 2: Pry Off the Back Section
Insert the key back into the keyhole, just enough to get under the lip of the back section of plastic.
Gently pry back until you hear a small click. This indicates that the back section has been loosened.
Use your fingers to pull apart the two halves of the key fob. It should come apart easily.
Step 3: Remove the Old Battery
Once you have the key fob open, you will see the old battery.
You can use your fingers to pull it out. However, it might be easier to use a flathead screwdriver, pen, or pencil to pry the battery up.
Dispose of the old battery properly.
Step 4: Insert the New Battery
Take your new CR2032 battery and make sure the positive side (marked with a plus sign) is facing down.
Click the new battery into place.
Step 5: Reassemble the Key Fob
Align the two halves of the key fob and click them back together.
Make sure everything is securely in place.
Insert the internal key back into its original position.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
This process should take you less than five minutes. It’s simple and requires minimal effort.
For more tutorials on different key fobs, visit our website at FobBattery.com.
FAQ
What type of battery does the Cadillac XT5 key fob use?
The Cadillac XT5 key fob uses a CR2032 battery.
Do I need any special tools to replace the battery?
No, you do not need any special tools. A flathead screwdriver, pen, or pencil can be helpful but are not necessary.
How long does it take to replace the battery?
The entire process should take less than five minutes.
What should I do with the old battery?
Dispose of the old battery properly, following local guidelines for battery disposal.
Where can I buy a CR2032 battery?
You can purchase a CR2032 battery online, often for just a few dollars.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Can I find more tutorials like this?
Yes, you can find more tutorials on our website, FobBattery.com, where we cover various devices from different makers and models.