Introduction
Replacing the battery in your Dodge Durango key fob is a simple task. This guide covers the key fobs used for Durango models from 2011 to 2013. You’ll need a CR2032 coin battery and a flathead screwdriver to get started.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Gather Your Tools
Before you begin, ensure you have the necessary tools:
- CR2032 coin battery
- Flathead screwdriver
You can purchase the CR2032 battery online. I’ve provided a link to buy it on Amazon for just a couple of bucks.
Step-by-Step Guide
Step 1: Locate the Indentation
First, locate the indentation near the keyring. This spot is where you’ll insert your flathead screwdriver. You should also see a seam along the side of the key fob.
Step 2: Insert the Screwdriver
Gently push and wiggle the flathead screwdriver into the corner near the indentation. Once it’s in, give it a twist. You’ll hear a crack, indicating that the key fob has started to open.
Step 3: Open the Key Fob
Continue twisting the screwdriver down the seam. Be gentle to avoid damaging the key fob. The two halves will eventually separate.
Step 4: Remove the Rubber Component
Inside the key fob, you’ll find a rubber component with buttons. Set this aside carefully.
Step 5: Remove the Old Battery
Use the flathead screwdriver or your fingernail to lift the old battery out of its compartment. The battery should come out easily.
Step 6: Insert the New Battery
Take your new CR2032 battery and ensure the positive side faces down. Click it into place securely.
Step 7: Reassemble the Key Fob
Place the rubber component with buttons back into the key fob. Align the two halves of the key fob and click them back together. Ensure everything is securely in place.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
That’s it! You’ve successfully replaced the battery in your Dodge Durango key fob. This simple process ensures your key fob remains functional without the need for professional assistance.
FAQ
What type of battery does the Dodge Durango key fob use?
The Dodge Durango key fob uses a CR2032 coin battery.
Where can I buy a CR2032 battery?
You can purchase a CR2032 battery online. I’ve provided a link to buy it on Amazon for just a couple of bucks.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Do I need any special tools to replace the battery?
You’ll need a flathead screwdriver to open the key fob. No other special tools are required.
How often should I replace the battery in my key fob?
Battery life varies, but replacing it every 1-2 years is a good rule of thumb.
Can I use a different type of battery?
No, it’s essential to use the specified CR2032 battery for proper functionality.
What should I do if the key fob doesn’t work after replacing the battery?
Ensure the battery is correctly installed with the positive side facing down. If it still doesn’t work, the key fob might have other issues requiring professional assistance.
Additional Tips
Handle with Care
While opening the key fob, be gentle to avoid damaging the plastic casing.
Dispose of Old Batteries Properly
Old batteries should be disposed of at designated recycling centers to prevent environmental harm.
Test the Key Fob
After replacing the battery, test your key fob to ensure it functions correctly. Try locking and unlocking your vehicle to confirm.
Visit Us for More Information
If you found this guide helpful, feel free to leave a like or comment. For more information on changing the batteries of any of your key fobs from any make or model, check out the rest of the videos on our YouTube channel or visit us on fobbattery.com.
Thank you for reading!