Introduction
Replacing the battery in your Toyota Venza key fob is a simple task that can be done at home. In this guide, I will walk you through the steps needed to replace the internal battery.
For this tutorial, you will need a CR2032 battery and a small flathead screwdriver. If you need to purchase the battery, you can find it online for just a couple of bucks.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Step-by-Step Battery Replacement
Step 1: Remove the Internal Key
The first step is to locate the switch on the bottom of the key fob. Hold down the switch and pull out the internal key.
Step 2: Open the Key Fob
Next, you will need a small flathead screwdriver. Look for the keyhole and a small slot in the plastic next to it. Insert the screwdriver into this slot and twist it to crack open the key fob.
Step 3: Remove the Battery Housing
Set the opened key fob aside and dump out the internal component that houses the battery.
Step 4: Pry Out the Old Battery
In the top right corner of the battery housing, there is a small space for removing the battery. Insert your flathead screwdriver into this space and pry the battery out.
If your screwdriver is too large, you can use a smaller tool like a precision screwdriver, paper clip, or bobby pin. It doesn’t take much force to remove the battery.
Step 5: Insert the New Battery
When inserting the new battery, make sure the positive side is facing up. Slide the new battery into place and click it in. The plus sign should be visible.
Step 6: Reassemble the Key Fob
Place the battery housing back into the key fob. Make sure the battery sits directly on top of the circle in the back piece of plastic.
Click the two halves of the key fob back together and reinsert the internal key. You are all set and good to go!
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
I hope this guide was helpful for you. Replacing the battery in your Toyota Venza key fob is a quick and easy process. If you found this tutorial useful, feel free to let me know in the comments or by liking this post.
If you need help changing another battery in one of your key fobs, check out our other tutorials on YouTube or visit our website at fobbattery.com.
Frequently Asked Questions (FAQ)
What type of battery does the Toyota Venza key fob use?
The Toyota Venza key fob uses a CR2032 coin battery.
Where can I buy a CR2032 battery?
You can purchase a CR2032 battery online on platforms like Amazon.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Do I need any special tools to replace the battery?
You will need a small flathead screwdriver to open the key fob and pry out the old battery.
How long does the replacement process take?
The entire process of replacing the key fob battery should take no more than a few minutes.
Can I use any other type of battery?
No, you should use a CR2032 battery as it is specifically designed for the key fob.
What should I do if the new battery doesn’t work?
Ensure the positive side is facing up and the battery is properly clicked into place. If it still doesn’t work, try another battery.
Is it safe to use a smaller tool to pry out the battery?
Yes, you can use a smaller tool like a precision screwdriver, paper clip, or bobby pin if your flathead screwdriver is too large.
How often should I replace the key fob battery?
It depends on usage, but typically every 1-2 years.