How to Replace the Battery in a Buick LeSabre Key Fob (1996 – 2005)

Introduction

As a Buick LeSabre owner, maintaining your key fob’s functionality is crucial. A dead battery can render the key fob useless, causing inconvenience. Fear not, replacing the battery is a straightforward process. This guide will walk you through the steps to replace the battery in your Buick LeSabre key fob.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Tools and Materials Needed

Before we begin, gather the necessary tools and materials:

  • CR2032 battery
  • Coin or flathead screwdriver

Identifying Your Key Fob

Your Buick LeSabre key fob may have three or four buttons. The fourth button is typically a panic button. Regardless of the number of buttons, the process to replace the battery remains the same.

Step-by-Step Guide

Step 1: Open the Key Fob

Locate the indentation along the seam at the bottom of the key fob. Use a coin or flathead screwdriver to insert into the indentation.

  • Insert coin or screwdriver
  • Gently twist
  • Pull apart with fingers

Step 2: Remove the Old Battery

With the key fob open, you can see the battery. Use your fingernail to pull it out. If it’s difficult, use a flathead screwdriver or a pen to slide under the battery and lift it gently.

  • Pull out with fingernail
  • Use a tool if necessary

Step 3: Insert the New Battery

Take your new CR2032 battery and ensure the positive side faces down. Click the battery into place.

  • Positive side down
  • Click into place

Step 4: Reassemble the Key Fob

Align the two halves of the key fob and press them together until they click securely.

  • Align halves
  • Press together
Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Conclusion

Replacing the battery in your Buick LeSabre key fob is a simple task that can be completed in minutes. By following these steps, you ensure your key fob remains functional and reliable.

If you found this guide helpful, feel free to like and comment. For more tutorials on key fob maintenance, visit our website.

FAQ

What type of battery does the Buick LeSabre key fob use?

The Buick LeSabre key fob uses a CR2032 coin battery.

Can I use a different type of battery?

No, it’s recommended to use a CR2032 battery to ensure proper functionality.

What if my key fob still doesn’t work after replacing the battery?

Ensure the battery is inserted correctly with the positive side facing down. If it still doesn’t work, the key fob may have other issues.

How often should I replace the key fob battery?

Typically, the battery lasts 1-2 years. Replace it when you notice reduced range or inconsistent functionality.

Where can I buy a CR2032 battery?

You can purchase a CR2032 battery at most electronics stores or online retailers like Amazon.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.