Introduction
Replacing the battery in your Chrysler Concorde key fob is a straightforward task you can easily perform at home. This guide will walk you through the process step-by-step, ensuring you can do it without any hassle. The key fob in question is used for models between 1998 and 2004 and requires two CR2016 coin batteries.
By following this guide, you’ll save time and money by avoiding a trip to the dealership. Let’s dive into the details.
- Used in heart rate monitors, keyless entry, glucose monitors, toys & games
- Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
- Reliable, dependable power
Tools and Materials Needed
Before starting, make sure you have the following materials and tools:
- Two CR2016 coin batteries
- Flathead screwdriver
You can purchase the CR2016 batteries online for just a couple of bucks. I’ve included a link to buy them on Amazon in the description.
Step-by-Step Battery Replacement Process
Step 1: Locate the Indentation
First, find the small indentation on the side of the key fob. This slot is designed for you to insert a tool and open the key fob.
Step 2: Insert the Flathead Screwdriver
Gently insert the flathead screwdriver into the slot. Twist it gently to start opening the key fob along the seam. You’ll notice it begins to separate.
Once you have a gap, you can either continue using the screwdriver or pull it apart with your fingers. I prefer to continue twisting along the seam until it comes apart easily.
Step 3: Remove the Old Batteries
Now you have access to the two batteries inside. They are stacked on top of each other. To remove the top battery, you can use the flathead screwdriver to get under it or simply use your fingernail to pull it out.
For the second battery, push down on one side. This will cause the other side to lift, making it easier to remove. Use your fingernail or the screwdriver to lift it out, and it will fall right out.
Step 4: Insert New Batteries
Take your two new CR2016 batteries. Make sure the positive side is facing up. Place the first battery in the slot and click it into place. Then, stack the second battery on top, also with the positive side facing up, and click it into place.
Step 5: Reassemble the Key Fob
Once the new batteries are in place, all that’s left is to click the key fob back together. Make sure it’s securely closed and you’re all set.
- Used in heart rate monitors, keyless entry, glucose monitors, toys & games
- Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
- Reliable, dependable power
Conclusion
And that’s it! You’ve successfully replaced the batteries in your Chrysler Concorde key fob. This simple process can save you time and money, and you can do it right at home.
If you found this guide helpful, feel free to leave a like or comment. For more information on changing batteries for key fobs of any make or model, check out the rest of our videos or visit fobbattery.com.
FAQ
What type of battery does the Chrysler Concorde key fob use?
The Chrysler Concorde key fob uses two CR2016 coin batteries.
Where can I purchase the CR2016 batteries?
You can purchase CR2016 batteries online. They are available on Amazon for just a few dollars.
- Used in heart rate monitors, keyless entry, glucose monitors, toys & games
- Important: Coin Lithium batteries are not interchangeable; Both the diameter and thickness can vary based on the cell designation; While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size
- Reliable, dependable power
Can I use any other type of battery?
No, it’s recommended to use CR2016 batteries as specified. Using the wrong type could affect the key fob’s functionality.
Is it difficult to replace the batteries?
No, replacing the batteries is a simple process that can be done at home with a flathead screwdriver.
What if the key fob doesn’t work after replacing the batteries?
Ensure the batteries are installed correctly with the positive side facing up. If it still doesn’t work, the key fob might have other issues requiring professional assistance.
How often should I replace the key fob batteries?
It varies based on usage, but typically every 1-2 years. If the key fob starts to work intermittently, it’s a good indicator that the batteries need replacing.
Additional Tips
Here are some extra tips to ensure a smooth battery replacement process:
- Work on a clean, flat surface
- Keep the old batteries out of reach of children
- Dispose of old batteries properly
- Test the key fob before reassembling
By following these tips and the steps outlined above, you’ll have your Chrysler Concorde key fob working like new in no time.