Introduction
Maintaining your BMW X4 key fob is crucial for the smooth operation of your vehicle. One of the most common maintenance tasks is replacing the key fob battery. This guide will walk you through the steps to replace the battery in your BMW X4 key fob, specifically for the 2018 and 2019 models.
Whether you own an xDrive20i, xDrive30i, M40i, xDrive20d, xDrive25d, xDrive30d, or M40d, this guide will help you get your key fob back in working order. Let’s dive in.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Tools and Materials Needed
Before you start, make sure you have the following tools and materials:
- CR2032 Coin Battery
- Small Flat-Head Screwdriver
You can purchase the CR2032 coin battery online or at most electronics stores. Having a small flat-head screwdriver on hand will make the process easier.
Step-by-Step Guide to Replacing the Battery
Step 1: Remove the Valet Key
The first step is to remove the valet key from your key fob. To do this, depress the side of the key fob near the top. This will release the valet key.
Step 2: Locate the Battery Compartment
Once the valet key is removed, you will see a small hole next to the valet key slot. This hole is the perfect size for a small flat-head screwdriver or even the valet key itself.
Step 3: Open the Battery Compartment
Insert the flat-head screwdriver or the valet key into the hole and use it as leverage to pop off the back cover of the key fob. This will give you access to the internal battery compartment.
Step 4: Remove the Old Battery
Inside the battery compartment, you will find a CR2032 battery. To remove it, gently pop it out from the top. There are two holdings at the top and a base part that keep the battery in place.
Step 5: Insert the New Battery
Take the new CR2032 battery and place it into the compartment. Make sure to insert the bottom part first to avoid the battery flying out. Once it is securely in place, you can proceed to the next step.
Step 6: Reassemble the Key Fob
Place the back cover of the key fob back on by aligning the curved part with the base first. Once it is in place, press down to snap it back together. Finally, reinsert the valet key.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
Replacing the battery in your BMW X4 key fob is a simple process that can be done in just a few minutes. By following these steps, you can ensure that your key fob remains functional and reliable.
Remember to dispose of the old battery properly and keep a spare CR2032 battery on hand for future replacements.
Frequently Asked Questions (FAQ)
What type of battery does the BMW X4 key fob use?
The BMW X4 key fob uses a CR2032 coin battery.
How often should I replace the key fob battery?
It is recommended to replace the key fob battery every 1-2 years, or when you notice a decrease in range or response time.
Can I use any brand of CR2032 battery?
Yes, you can use any brand of CR2032 battery as long as it is a 3-volt battery.
What should I do if the key fob still doesn’t work after replacing the battery?
If the key fob still doesn’t work after replacing the battery, check to ensure the battery is properly installed. If the problem persists, contact your BMW dealer for further assistance.
Is it possible to damage the key fob while replacing the battery?
As long as you follow the steps carefully and use the appropriate tools, it is unlikely that you will damage the key fob. However, if you are unsure, it is always best to consult a professional.
Can I replace the key fob battery myself?
Yes, replacing the key fob battery is a straightforward process that can be done at home with minimal tools.
Where can I buy a CR2032 battery?
You can purchase a CR2032 battery at most electronics stores, supermarkets, or online retailers.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
How can I dispose of the old battery?
Dispose of the old battery at a designated battery recycling center or follow local regulations for battery disposal.
Additional Tips
Here are a few additional tips to keep your key fob in good working condition:
- Keep the key fob dry
- Avoid dropping it
- Store it in a safe place
By following these simple maintenance tips, you can extend the life of your BMW X4 key fob and ensure it continues to function properly.
Final Thoughts
Maintaining your BMW X4 key fob is essential for the overall performance of your vehicle. By regularly checking and replacing the battery, you can avoid inconvenient situations and ensure that your key fob is always ready to go.
Thank you for reading this guide. We hope it has been helpful in assisting you with replacing the battery in your BMW X4 key fob.