How to Replace the Battery in an Acura MDX Key Fob (2014 – 2018)

Introduction

Today, I will guide you through the process of changing the internal battery in an Acura MDX key fob. This key fob was used between 2014 and 2018 and utilizes a CR2032 battery. You can easily find this battery on Amazon for just a couple of bucks. Additionally, you’ll only need a flathead screwdriver to complete the task.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Required Tools and Materials

  • CR2032 battery
  • Flathead screwdriver

Step-by-Step Guide

Step 1: Remove the Internal Key

The first step is to flip the key fob over. Locate the lever on the back and push it while holding it down. Pull out the internal key from the key fob.

Step 2: Create a Separation

Now, stay on the back of the key fob and look for a small space between the metal keyring holder and the lip of the key fob. Insert your flathead screwdriver into this space. Wiggle the tool until it feels secure.

Step 3: Twist to Separate

Once the tool is secure, twist it gently but firmly until you feel a small pop. This indicates that a separation has been created on the side of the key fob.

Step 4: Open the Key Fob

Now, insert your tool into the side of the key fob where the separation was created. Twist the tool gently and move it down a little bit, twisting again. The key fob will come apart, revealing the internal battery compartment.

Step 5: Remove the Old Battery

Carefully insert the flathead screwdriver under the battery from the side. Be slow and gentle to avoid damaging the key fob. With a slight twist, the old battery will pop out.

Step 6: Insert the New Battery

Take the new CR2032 battery and ensure the positive side is facing up. Begin by sliding one side of the battery into the compartment, then click the other side down. The battery should sit flush and secure.

Step 7: Reassemble the Key Fob

Click the two halves of the key fob back together. Ensure that the light comes on to confirm that the battery is properly installed. Reinsert the internal key, and you’re good to go!

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Conclusion

There you have it! You’ve successfully replaced the battery in your Acura MDX key fob. If this guide helped you, feel free to leave a like or a comment. For more detailed guides on Acura key fobs, click the link in the description to visit fob battery.com. Thank you for following along!

FAQs

How often should I replace my key fob battery?

Typically, a key fob battery lasts between 2 to 3 years. However, if you notice a decrease in range or the fob becomes unresponsive, it may be time for a replacement.

Where can I buy a CR2032 battery?

You can purchase CR2032 batteries on Amazon or at most electronic stores. They are inexpensive and readily available.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Do I need any special tools?

No special tools are required. A flathead screwdriver will suffice for this task.

Is it safe to replace the battery myself?

Yes, it is safe and straightforward to replace the battery yourself. Just follow the steps carefully to avoid damaging the key fob.

Can I use any brand of CR2032 battery?

Yes, any brand of CR2032 battery should work fine. Just ensure it is a CR2032 type.

Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.