Introduction
Replacing the battery in your Audi S7 key fob is a simple and quick task. In this guide, I will walk you through the steps needed to swap out the old battery for a new one. By following these instructions, you can ensure your key fob remains functional without having to visit a dealership.
The only tool required for this task is a new CR2032 coin battery. If you don’t have one, you can easily purchase it online.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Materials Needed
- CR2032 coin battery
- Your Audi S7 key fob
Step-by-Step Instructions
Step 1: Remove the Internal Key
First, flip the key fob over to locate the button on the bottom of the back side. Hold this button down and pull out the internal key. This will give you access to the battery compartment.
Step 2: Access the Battery Compartment
Next, look at the front of the key fob. There’s a button that allows the entire piece to slide out. Hold the key fob firmly, press the button, and pull the tab out. You might need to wiggle it a bit, but it will come out.
Step 3: Remove the Old Battery
Once the battery compartment is accessible, simply remove the old CR2032 battery. Be careful not to damage any of the internal components while doing this.
Step 4: Insert the New Battery
Take your new CR2032 battery and ensure the positive side is facing down. Place the battery into the compartment, making sure it sits securely in place.
Step 5: Reassemble the Key Fob
Now, slide the battery compartment back into the key fob. Push it all the way down until it clicks into place. Finally, reinsert the internal key.
Step 6: Test the Key Fob
To ensure everything is working correctly, press any button on the key fob. If the light activates, you’ve successfully replaced the battery and your key fob is good to go.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Frequently Asked Questions (FAQs)
How often should I replace my Audi S7 key fob battery?
Typically, the battery in a key fob should be replaced every 1-2 years. However, if you notice reduced functionality or a warning light, it’s time to replace it sooner.
What if my key fob still doesn’t work after replacing the battery?
If your key fob isn’t working after replacing the battery, double-check that the battery is installed correctly with the positive side facing down. If it still doesn’t work, the issue might be with the key fob itself, and you may need professional assistance.
Can I use a different type of battery?
No, it’s important to use a CR2032 battery as specified. Using a different battery type can cause malfunction or damage to the key fob.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Do I need to reprogram my key fob after changing the battery?
In most cases, you do not need to reprogram your key fob after changing the battery. It should work immediately once the new battery is installed.
Conclusion
Replacing the battery in your Audi S7 key fob is a straightforward task that can save you time and money. With just a few minutes and a CR2032 battery, you can keep your key fob functioning properly. If you found this guide helpful, feel free to leave a comment or like. For more tutorials, visit our channel.