Introduction
Replacing the battery in your Acura Integra key fob is a straightforward process. Whether you have the older version or the black version, the steps remain the same. This guide will walk you through the process, ensuring you can easily replace the battery and get your key fob working again.
- 2 pack of Energizer 2025 Batteries, 3V Lithium Coin Batteries
- Performs in extreme temperatures from -22 F to 140 F
- Long-lasting choice for calculators, scales and remote batteries
Tools and Materials Needed
Before you start, make sure you have the following items:
- Flathead screwdriver
- CR2025 coin battery
You can purchase these items online. I’ve included a link in the description for convenience.
Step-by-Step Guide
Step 1: Locate the Groove
First, find the groove on the bottom of the key fob where the keyring is attached. This is where you’ll insert the flathead screwdriver.
Step 2: Insert and Twist the Screwdriver
Take the flathead screwdriver and insert it into the groove. Twist the screwdriver gently. You’ll notice the two halves of the key fob start to separate.
Step 3: Separate the Two Halves
Continue twisting the screwdriver along the side of the key fob. The two halves will eventually click apart. Be gentle to avoid damaging the plastic.
Step 4: Remove the Old Battery
With the key fob open, you’ll see the old battery. Use the screwdriver to gently lift and remove the old battery. It should come out easily.
Step 5: Insert the New Battery
Take the new CR2025 battery. Ensure the positive side, marked with battery information, faces down. Press it gently into place until it clicks.
Step 6: Reassemble the Key Fob
Align the two halves of the key fob and press them together. You should hear a click, indicating the fob is securely closed. Check to see if the light comes on when you press a button.
- 2 pack of Energizer 2025 Batteries, 3V Lithium Coin Batteries
- Performs in extreme temperatures from -22 F to 140 F
- Long-lasting choice for calculators, scales and remote batteries
Tips and Troubleshooting
Here are some additional tips to ensure a smooth battery replacement:
- Work on a clean, flat surface
- Handle the battery with care
- Ensure the screwdriver is the right size
If the key fob doesn’t work after replacing the battery, double-check the battery orientation. The positive side should face down.
Conclusion
Replacing the battery in your Acura Integra key fob is a simple task that can save you time and money. With just a few tools and a new battery, your key fob will be working like new. If you found this guide helpful, feel free to like or leave a comment.
Frequently Asked Questions (FAQ)
What type of battery does the Acura Integra key fob use?
The Acura Integra key fob uses a CR2025 coin battery.
Where can I buy a CR2025 battery?
You can purchase a CR2025 battery online or at most electronics stores.
- 2 pack of Energizer 2025 Batteries, 3V Lithium Coin Batteries
- Performs in extreme temperatures from -22 F to 140 F
- Long-lasting choice for calculators, scales and remote batteries
What if my key fob looks different?
Even if your key fob looks different, the process remains the same. Follow the steps outlined in this guide.
How long does the replacement process take?
The entire process should take no more than a few minutes.
Do I need any special tools?
No special tools are required. A flathead screwdriver and the new battery are all you need.
How do I know if the battery is inserted correctly?
The positive side of the battery should face down. Ensure it’s clicked into place securely.
What should I do if the key fob still doesn’t work?
Double-check the battery orientation and ensure the fob is properly reassembled. If it still doesn’t work, the key fob itself may need replacement.
Additional Resources
For a full guide on this key fob or any other Acura Integra key fob, visit the link in the description. You’ll find detailed information and additional tips to keep your key fob in top condition.
Thank you for reading! If you have any questions, feel free to leave a comment.