Introduction
Replacing the battery in your Acura TL key fob is a straightforward process. Whether you have the black, pill-shaped key fob or an older model, the steps remain the same. In this guide, I will walk you through the entire process.
All you need is a CR2025 battery and a flat-head screwdriver. Follow these steps, and you will have your key fob working in no time.
- 2 pack of Energizer 2025 Batteries, 3V Lithium Coin Batteries
- Performs in extreme temperatures from -22 F to 140 F
- Long-lasting choice for calculators, scales and remote batteries
Tools and Materials Needed
- CR2025 battery
- Flat-head screwdriver
Step-by-Step Battery Replacement Guide
Step 1: Locate the Groove
First, find the small groove located at the bottom of the key fob, near the key ring. This is where you will insert your flat-head screwdriver.
Step 2: Insert the Screwdriver
Take your flat-head screwdriver and insert it into the groove. Twist the screwdriver to start opening the key fob. You will notice the plastic case beginning to separate.
Step 3: Open the Key Fob
Continue twisting the screwdriver down the side of the key fob. This will further open the casing. Keep twisting until the key fob is completely open.
Step 4: Remove the Old Battery
Once the key fob is open, locate the old CR2025 battery. Use the screwdriver to gently lift and remove it. The battery should pop out with very little effort.
Step 5: Insert the New Battery
Take a new CR2025 battery. Ensure that the positive side, which has the text and battery information, is facing down. Position the battery in place and apply a little pressure until it clicks in.
Step 6: Reassemble the Key Fob
After inserting the new battery, snap the two pieces of plastic casing back together. Make sure they are securely clicked into place.
Step 7: Test the Key Fob
Finally, do a quick check to ensure the key fob is working correctly. Press a button and see if the light comes on. If it does, you are all set!
- 2 pack of Energizer 2025 Batteries, 3V Lithium Coin Batteries
- Performs in extreme temperatures from -22 F to 140 F
- Long-lasting choice for calculators, scales and remote batteries
Additional Tips
To make the battery replacement process even smoother, consider the following tips:
- Work on a flat surface
- Keep the old battery away from children
- Dispose of the old battery properly
Frequently Asked Questions
What type of battery does the Acura TL key fob use?
The Acura TL key fob uses a CR2025 coin battery.
Where can I buy the CR2025 battery?
You can purchase the CR2025 battery on Amazon or at most electronics stores.
- 2 pack of Energizer 2025 Batteries, 3V Lithium Coin Batteries
- Performs in extreme temperatures from -22 F to 140 F
- Long-lasting choice for calculators, scales and remote batteries
Do I need any special tools?
No, you only need a flat-head screwdriver to open the key fob.
How often should I replace the battery?
Typically, the battery should last for a couple of years. Replace it when the key fob stops working.
Can I use a different battery model?
No, using a different battery model may not work and could damage the key fob.
Conclusion
Replacing the battery in your Acura TL key fob is a simple task that you can do at home. With just a CR2025 battery and a flat-head screwdriver, you can have your key fob working like new in minutes.
If you found this guide helpful, feel free to like or comment. For more detailed guides on Acura key fob battery replacements, visit the provided links.