Audi A6 Key Fob Battery Replacement Guide (2016 – 2022)

Introduction

Replacing the battery in your Audi A6 key fob is a simple task you can accomplish at home without any special tools. This guide will walk you through the steps needed to replace the battery in models from 2016 to 2022.

All you need is a new CR2032 battery. If you don’t have one on hand, you can easily purchase it online.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Materials Needed

Before we begin, let’s gather the necessary materials. Here’s what you’ll need:

  • CR2032 battery
  • Your Audi A6 key fob

If you don’t have a CR2032 battery, you can get one from Amazon.

Step-by-Step Battery Replacement

Follow these steps to replace the battery in your Audi A6 key fob:

Remove the Internal Key

First, locate the buttons on the bottom of the key fob. There is one button on each side.

  • Press both buttons simultaneously.
  • Pull out the internal key.

Access the Battery Compartment

Next, look at the bottom of the key fob where you just removed the internal key. You’ll see a component with a switch on either side.

  • Hold down both switches.
  • Pull and wiggle the component until it comes out.

Replace the Battery

With the component removed, you will see the battery. Here’s how to replace it:

  • Flip the component over.
  • Remove the old CR2032 battery.
  • Insert the new CR2032 battery with the positive side facing down.

Ensure the battery is securely in place.

Reassemble the Key Fob

Once the new battery is in place, it’s time to reassemble the key fob:

  • Slide the component back into the key fob with the buttons facing up.
  • Push down until you hear a click.
  • Reinsert the internal key and snap it into place.
Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Conclusion

That’s it! You’ve successfully replaced the battery in your Audi A6 key fob. It’s a quick and easy process that can save you time and money.

If you found this guide helpful, feel free to leave a comment or like. For more tutorials on replacing key fob batteries, visit FobBattery.

FAQs

Here are some frequently asked questions about replacing the battery in an Audi A6 key fob:

What type of battery does the Audi A6 key fob use?

The Audi A6 key fob uses a CR2032 coin battery.

Do I need any special tools to replace the battery?

No, you do not need any special tools to replace the battery in your Audi A6 key fob.

How often should I replace the battery in my key fob?

It’s a good idea to replace the battery every 1-2 years, or whenever you notice a decrease in the range of your key fob.

Where can I buy a CR2032 battery?

You can purchase a CR2032 battery from Amazon.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

What should I do if my key fob still doesn’t work after replacing the battery?

If your key fob still doesn’t work after replacing the battery, try the following steps:

  • Ensure the battery is inserted correctly.
  • Check for any corrosion or debris inside the battery compartment.
  • Consult your vehicle’s manual for troubleshooting tips.

If the issue persists, you may need to contact an Audi dealership for further assistance.

Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.