Audi R8 Key Fob Battery Replacement (2016 – 2022)

Introduction

Replacing the battery in your Audi R8 key fob is a straightforward process. It takes just a few minutes and requires only a replacement battery, specifically a CR2032 coin battery. Below, I’ll guide you through each step to ensure you can get it done quickly and efficiently.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Gathering Your Materials

Before starting, you’ll need a CR2032 coin battery. These batteries are inexpensive and can be found online. For convenience, you can purchase them from Amazon.com. Having the right battery is crucial for the proper functioning of your key fob.

Removing the Internal Key

First, locate the buttons on the bottom metal part of the key fob. There is one button on each side. Hold both buttons down simultaneously and pull to remove the internal key. This step is essential to access the battery compartment.

Accessing the Battery Compartment

After removing the internal key, you’ll see two more buttons inside. Again, there is one button on each side. Hold both buttons down and pull. Wiggle the piece until it starts to come out, then pull it out completely to expose the battery.

Removing the Old Battery

With the battery compartment open, you can now remove the old battery. Simply use your fingers to take it out. Be sure to dispose of the old battery properly, as it contains chemicals that can be harmful to the environment.

Inserting the New Battery

Once you have your new CR2032 battery, ensure the positive side (marked with a plus sign) is facing down. Flip the battery upside down and set it into place. This orientation is crucial for the battery to work correctly.

Reassembling the Key Fob

To reassemble the key fob, make sure the buttons are facing up and the battery is facing down. Slide the compartment back in until it clicks into place. Finally, reattach the internal key. Your key fob should now be fully functional with the new battery.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Conclusion

I hope you found this guide helpful. If you did, feel free to leave a comment or like. For more tutorials on replacing key fob batteries, visit FobBattery. We have a comprehensive database of guides for various car models.

FAQ

What type of battery does the Audi R8 key fob use?

The Audi R8 key fob uses a CR2032 coin battery.

How often should I replace the key fob battery?

It’s generally recommended to replace the key fob battery every 1-2 years, depending on usage.

What should I do with the old battery?

Dispose of the old battery properly by taking it to a recycling center. Batteries contain harmful chemicals that can damage the environment.

Is there a way to know if the battery is low?

Yes, if your key fob stops working or shows reduced range, it’s likely time to replace the battery.

Can I use a different type of battery?

No, it’s important to use a CR2032 battery to ensure proper functionality.

Where can I buy a replacement battery?

You can purchase a replacement battery from Amazon or other online retailers.

Amazon Basics 4-Pack CR2032 Lithium Coin Cell Battery, Compatible with AirTag, 3 Volt, Long Lasting Power, Mercury-Free
  • Plastic, Metal
  • Imported
  • IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032

Where can I find more guides on key fob battery replacement?

You can find more guides on the FobBattery website, which offers detailed instructions for various car models.

Proudly powered by WordPress | Theme: Sprout Blog by Crimson Themes.