Buick Verano Key Fob Battery Replacement (2012 – 2017)

Introduction

Replacing the battery in your Buick Verano key fob is a straightforward process. In this guide, I will walk you through the steps to replace the key fob battery for models from 2012 to 2017. This task can be completed in just a few minutes and requires minimal tools.

You’ll need a CR2032 coin battery, which you can easily purchase online or at a local store. Below, I’ll explain the entire process step-by-step to ensure you can do it without any hassle.

Tools and Materials Needed

Before starting, make sure you have the following items:

• CR2032 coin battery
• Small flathead screwdriver
• Clean cloth

Step-by-Step Guide

Step 1: Open the Key Fob

First, locate the seam on the key fob where the two halves meet. This is usually along the edge of the fob. Use the small flathead screwdriver to gently pry open the key fob. Insert the screwdriver into the seam and twist it slightly to separate the two halves.

Be careful not to use too much force, as this could damage the plastic casing. Once the key fob is open, set the top half aside.

Step 2: Remove the Old Battery

With the key fob open, you’ll see the old battery seated in a small compartment. Use the flathead screwdriver to gently lift and remove the old battery. Make sure to note the orientation of the battery, as you’ll need to install the new one in the same way.

Step 3: Install the New Battery

Take the new CR2032 coin battery and place it into the battery compartment. Ensure that the positive side (usually marked with a “+”) is facing up. Press the battery down gently to secure it in place.

Step 4: Reassemble the Key Fob

Once the new battery is installed, align the two halves of the key fob and press them together. Make sure the seam is fully closed and that there are no gaps. You should hear a click when the fob is securely closed.

Step 5: Test the Key Fob

Finally, test the key fob to ensure it’s working correctly. Stand near your Buick Verano and press any button on the fob. If the battery replacement was successful, the fob should work as expected.

Tips and Precautions

• Handle the key fob gently
• Avoid touching the battery terminals
• Dispose of the old battery properly

Common Issues and Solutions

Key Fob Not Working After Battery Replacement

If your key fob isn’t working after replacing the battery, double-check that the battery is installed correctly. Ensure the positive side is facing up and that the battery is seated properly.

Key Fob Buttons Not Responding

If the buttons on your key fob are not responding, there may be an issue with the contacts inside the fob. Open the key fob again and clean the contacts with a dry, clean cloth.

FAQs

What type of battery does the Buick Verano key fob use?

The Buick Verano key fob uses a CR2032 coin battery.

How often should I replace the key fob battery?

Typically, the key fob battery should be replaced every 2-3 years, depending on usage.

Can I use a different type of battery?

No, it’s important to use a CR2032 coin battery for the Buick Verano key fob to ensure proper functionality.

Is it safe to replace the battery myself?

Yes, replacing the key fob battery is a simple and safe process that you can do at home with minimal tools.

What should I do with the old battery?

Dispose of the old battery properly by taking it to a recycling center or a store that accepts battery recycling.

Conclusion

Replacing the battery in your Buick Verano key fob is a quick and easy task. By following the steps outlined in this guide, you can ensure your key fob remains functional and reliable. Remember to handle the key fob gently and dispose of the old battery responsibly. With a new CR2032 coin battery, your key fob will be as good as new.