Cadillac ATS Key Fob Battery Replacement Guide (2013 – 2014)

Introduction

Replacing the battery in your Cadillac ATS key fob is a simple task that you can do at home. This guide will walk you through the process step-by-step. All you need is a flathead screwdriver and a CR2032 battery.

Gather Your Tools

Before you begin, make sure you have everything you need:

• Flathead screwdriver
• CR2032 battery
• 5 minutes of your time

Having these items on hand will make the replacement process quick and easy.

Remove the Internal Key

The first step is to remove the internal key from the key fob. To do this, hold down the button on the bottom of the device and pull out the internal key. Set the key aside for now.

Open the Key Fob

Using your flathead screwdriver, insert it into the keyhole. Pry gently until you hear a crack, indicating that the key fob is starting to open. Continue to pry and twist the screwdriver until the key fob separates enough to pull apart with your fingers.

Handle the Circuit Board

Once the key fob is open, you might see the circuit board fall out. If this happens, don’t worry. Simply match the three rubber pegs on the circuit board with the corresponding slots in the key fob housing. This will ensure the circuit board is seated correctly.

Remove the Old Battery

Now, it’s time to remove the old battery. Use your flathead screwdriver to gently pry the battery out of its compartment. Be careful not to damage the surrounding components. Save any small pieces that come out with the battery.

Insert the New Battery

Take your new CR2032 battery and insert it into the metal component, positive side down. Ensure the battery clicks into place and sits flush within its compartment. This will ensure proper functionality.

Reassemble the Key Fob

With the new battery in place, you can now reassemble the key fob. Align the two halves of the key fob and press them together until they click into place. Finally, reinsert the internal key into the key fob.

Conclusion

That’s it! You’ve successfully replaced the battery in your Cadillac ATS key fob. If you found this guide helpful, feel free to leave a comment or like the video. For more key fob tutorials, visit our website.

FAQ

What tools do I need?

You need a flathead screwdriver and a CR2032 battery.

How long does it take to replace the battery?

The entire process takes about 5 minutes.

What if the circuit board falls out?

Simply match the three rubber pegs on the circuit board with the slots in the key fob housing.

How do I know if the battery is inserted correctly?

The battery should sit flush within its compartment, with the positive side facing down.

Can I use a different type of battery?

No, you should only use a CR2032 battery for this key fob.

What should I do with the old battery?

Dispose of the old battery properly according to your local regulations.

Where can I buy a CR2032 battery?

You can purchase a CR2032 battery from Amazon.

Where can I find more key fob tutorials?

You can find more tutorials on our website.