Introduction
Replacing the battery in your Cadillac Escalade key fob is a simple task. With just a few minutes and a CR2032 battery, you can have your key fob working like new. This guide will walk you through each step of the process.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Gathering Your Materials
Before starting, make sure you have a CR2032 battery. This is the type of battery your key fob requires. You can purchase these batteries online or at most retail stores.
If you prefer to shop online, there are links available that will direct you to Amazon, where you can buy a CR2032 battery for a few dollars. Once you have your battery, you’re ready to begin.
Opening the Key Fob
First, locate the button at the bottom of your key fob. Press this button and pull out the internal key.
Keep this key handy, as you’ll need it to open the back of the key fob. Insert the key into the keyhole, but only just barely. You don’t need to insert it all the way.
Apply a small amount of pressure until you hear a cracking sound. This indicates that the back section of plastic has begun to separate. You can now pull the key fob apart with your fingers.
Prying Open the Key Fob
If the key fob doesn’t come apart easily, you can continue to use the key to pry it open. Be careful not to insert the key too far, as this can make it difficult to apply the necessary pressure.
Once the back section is loose, you can set the key aside and proceed to remove the battery.
Removing the Old Battery
The old battery can be removed using your fingernails or a flathead screwdriver. If you can’t get a good grip with your fingernails, use the corner of a flathead screwdriver to gently lift the battery out.
Dispose of the old battery properly. Batteries should be recycled whenever possible to avoid environmental harm.
Inserting the New Battery
Take your new CR2032 battery and ensure that the positive side, marked with a plus sign and text, is facing down. Click the battery into place, ensuring it’s secure.
With the new battery installed, you can reassemble the key fob.
Reassembling the Key Fob
Align the two halves of the key fob and press them together until they click into place. This should be a simple process if everything is aligned correctly.
Once the key fob is reassembled, insert the internal key back into its slot. Your key fob is now ready to use.
Testing Your Key Fob
Before you consider the job complete, test your key fob to ensure it’s working properly. Press the buttons to make sure they respond as expected.
If the key fob doesn’t work, double-check that the battery is installed correctly and that the key fob is properly reassembled. If everything is in order and the key fob still doesn’t work, you may need to consult a professional.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Helpful Tips
When prying open the key fob, be gentle to avoid damaging the plastic. If you’re having trouble, take your time and apply steady pressure.
Always dispose of old batteries responsibly. Many retailers offer battery recycling services, and some municipalities have special disposal programs.
FAQ
What type of battery does the key fob use?
The Cadillac Escalade key fob uses a CR2032 battery.
Where can I buy a CR2032 battery?
You can buy a CR2032 battery at most retail stores or online. Links are available to purchase these batteries from Amazon.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Do I need any special tools?
No special tools are required. You can use the internal key to pry open the key fob, and a flathead screwdriver to remove the old battery if needed.
How often should I replace the battery?
Battery life varies, but you should replace the battery as soon as you notice it weakening. Regular checks can help you avoid being caught with a dead key fob.
Can I damage the key fob by opening it?
If you’re gentle and follow the instructions, you shouldn’t damage the key fob. Take your time and apply steady pressure to avoid breaking the plastic.
What if my key fob still doesn’t work?
If the key fob doesn’t work after replacing the battery, ensure the battery is installed correctly and the key fob is properly reassembled. If it still doesn’t work, consult a professional for further assistance.
Is it safe to dispose of the old battery in the trash?
No, it’s best to recycle old batteries. Many retailers offer recycling services, and some municipalities have special disposal programs for batteries.
Replacing the battery in your Cadillac Escalade key fob is a straightforward process. With a new CR2032 battery and a few minutes, you can have your key fob working like new. Follow these steps carefully, and you’ll be back on the road in no time.