Cadillac SRX Key Fob Battery Replacement Guide (2015 – 2016)

Introduction to Key Fob Battery Replacement

Replacing the battery in your Cadillac SRX key fob can be done at home with minimal tools. Whether your key fob has three, five, or even six buttons, the process remains the same. This guide will walk you through each step, ensuring your key fob is back in working order in no time.

Tools and Battery Required

To replace the battery in your Cadillac SRX key fob, you will need a CR2032 coin battery. Additionally, a flathead screwdriver may come in handy. These are the only tools required for this task.

• CR2032 coin battery
• Flathead screwdriver

You can purchase a CR2032 battery online. Click here to buy it from Amazon.

Removing the Internal Key

The first step is to remove the internal key from the key fob. There is a button on the key fob that you need to press to release the key. Follow these steps:

1. Press the button on the key fob.
2. Hold the button down.
3. Pull out the internal key.

Keep the key handy as you will need it in the next step.

Prying Open the Key Fob

Once the internal key is out, use it to pry open the back section of the key fob. This is a crucial step, so follow closely:

1. Insert the key back into its hole, but just barely.
2. Use the key to pry back the plastic cover.
3. You will hear a click as the back cover starts to come off.

Once you hear the click, use your fingers to gently pull apart the key fob.

Removing the Old Battery

With the key fob open, you can now remove the old battery. This can be done using your fingernail or a flathead screwdriver:

• Use your fingernail to lift the battery.
• Alternatively, use a flathead screwdriver to pry it up.
• Dispose of the old battery properly.

Inserting the New Battery

Now, it’s time to insert the new CR2032 battery. Ensure you place it correctly:

1. Take the new CR2032 battery.
2. Insert it with the positive side facing down.
3. Click the battery into place.

Reassembling the Key Fob

After inserting the new battery, you need to reassemble the key fob:

1. Line up the back cover with the key fob.
2. Press it together until it clicks.
3. Reinsert the internal key.

Your key fob should now be fully functional with its new battery.

Conclusion

Replacing the battery in your Cadillac SRX key fob is a straightforward process. With just a CR2032 battery and a flathead screwdriver, you can have your key fob working like new in minutes.

If you found this guide helpful, feel free to leave a comment or give it a like. For more key fob tutorials, visit our YouTube channel or check out our website at fobbattery.com.

Frequently Asked Questions (FAQ)

What type of battery does the Cadillac SRX key fob use?

The Cadillac SRX key fob uses a CR2032 coin battery.

Where can I buy a CR2032 battery?

You can purchase a CR2032 battery online Amazon.

Do I need any special tools to replace the battery?

No, you only need a CR2032 battery and a flathead screwdriver.

How do I open the key fob to replace the battery?

Press the button to release the internal key, then use the key to pry open the back cover.

What should I do with the old battery?

Dispose of the old battery properly, following local regulations for battery disposal.

Can I use this guide for other Cadillac models?

This guide is specifically for the Cadillac SRX 2015-2016 models, but the process may be similar for other models.

What if my key fob has more or fewer buttons?

The process is the same regardless of the number of buttons on your key fob.

Where can I find more key fob tutorials?

Visit our YouTube channel or our website at fobbattery.com for more tutorials.