Introduction
Replacing the battery in your Chevrolet Avalanche key fob is a simple task that can be done in under five minutes. Even if your key fob looks slightly different from the one in this guide, the process remains the same. Follow these steps to ensure your key fob is up and running again quickly.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
What You’ll Need
Before starting, gather the necessary tools and materials:
- Flathead screwdriver or coin (quarter or nickel)
- CR2032 battery
CR2032 batteries are easy to find and inexpensive. If you need to purchase one, you can buy it on Amazon.
Opening the Key Fob
First, locate the seam at the bottom of the key fob. There is a small indentation along the seam where you will insert your tool.
Using a Coin or Screwdriver
Insert the coin or flathead screwdriver into the indentation. Give it a slight twist, and the key fob will crack open. Use your fingers to gently pull it apart.
Removing the Old Battery
With the key fob open, you will see the old battery. There is a small space next to the battery that allows you to pry it out.
Using Your Fingers or a Tool
If you have long fingernails, you can try to pop the battery out with your fingers. Alternatively, use the flathead screwdriver, a pen, or a pencil to gently lift the battery out.
Be careful not to damage any components inside the key fob. The battery should come out easily with minimal force.
Inserting the New Battery
Now, take your new CR2032 battery. Ensure the positive side (marked with a plus sign and battery information) is facing down.
Drop the battery into place and press it down gently until it clicks.
Reassembling the Key Fob
After the new battery is securely in place, it’s time to reassemble the key fob.
Align the two halves of the key fob and press them together until they click. Ensure the key fob is fully closed to protect the battery and internal components.
Testing Your Key Fob
Once reassembled, test your key fob to ensure it works correctly. If the battery was installed correctly, your key fob should function as expected.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
Replacing the battery in your Chevrolet Avalanche key fob is quick and easy. With just a few simple steps, you can save time and money by doing it yourself.
If this guide was helpful, feel free to leave a comment or like. For more key fob tutorials, visit our website at fobbattery.com.
FAQ
What type of battery does the Chevrolet Avalanche key fob use?
The Chevrolet Avalanche key fob uses a CR2032 battery.
Can I use a different type of battery?
No, it is recommended to use a CR2032 battery to ensure proper functionality.
How often should I replace the key fob battery?
Key fob batteries typically last 1-2 years. Replace the battery when it starts to show signs of weakening, such as reduced range or intermittent functionality.
What if my key fob still doesn’t work after replacing the battery?
If your key fob doesn’t work after replacing the battery, ensure the battery is installed correctly. If the issue persists, there may be a problem with the key fob itself, and you may need to consult a professional.
Can I use a flathead screwdriver instead of a coin?
Yes, a flathead screwdriver works just as well as a coin for opening the key fob.
Is it difficult to open the key fob?
No, opening the key fob requires minimal force. Insert your tool into the indentation and twist gently.
Will replacing the battery void my warranty?
Replacing the battery in your key fob should not void your warranty. However, check your warranty terms to be sure.
Where can I buy a CR2032 battery?
You can purchase a CR2032 battery on Amazon.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032