Chevrolet Camaro Key Fob Battery Replacement (2016 – 2021)

Introduction

Replacing the battery in your Chevrolet Camaro key fob is a straightforward process that can be done at home. This guide will take you through each step, ensuring you can complete the task in under five minutes.

All you need are a flathead screwdriver and a CR2032 battery. If you don’t have the battery, you can easily purchase one online. Let’s dive into the process.

Step 1: Remove the Internal Key

The first step is to remove the internal key from the key fob. Locate the button on the side of the key fob.

Hold this button down and pull the key out. This internal key will be used to pry off the back section of the key fob.

Step 2: Pry Open the Key Fob

Using the internal key, insert it into the keyhole just a little bit. You don’t want to push it too far in. The key should lock in place in a specific position.

Once the key is in the right position, pull back on it while pushing up on the back section of plastic. This should start to open up the seam of the plastic.

If the key is inserted too far, it will be locked under a piece of plastic inside and the back will not come off. Adjust the key’s position until it locks in the correct place.

Step 3: Remove the Back Section

Once you have the key in the right position, the back section should start to come off. Hold the sides of the key fob without squeezing down on the back. This will make it easier to pry open.

With the key locked in place, continue to apply pressure until the back section comes off. This is the hardest part of the process, but with a little practice, it becomes easier.

Step 4: Remove the Old Battery

Now that you have the back section off, you can see the battery inside. Use a flathead screwdriver to get under the battery.

Carefully lift the battery out of its compartment. You can also use a pen or pencil if a screwdriver is not available.

Step 5: Insert the New Battery

Dispose of the old battery and take a new CR2032 battery. Ensure that the positive side, marked with a plus sign and text, is facing down.

Insert the new battery into the compartment, pressing it down to secure it in place.

Step 6: Reattach the Back Section

With the new battery in place, align the back section of the key fob with the rest of the device. Press down to snap it back together.

Ensure that all parts are properly aligned and securely attached.

Step 7: Reinsert the Internal Key

Finally, reinsert the internal key into its slot. The key fob is now ready to use with a fresh battery.

Conclusion

Replacing the battery in your Chevrolet Camaro key fob is a simple task that can save you time and money. By following these steps, you can easily replace the battery at home in just a few minutes.

If you found this guide helpful, feel free to leave a comment or like the post. For more key fob tutorials, visit our website.

FAQ

What tools do I need?

You will need a flathead screwdriver and a CR2032 battery.

How long does this process take?

The entire process should take under five minutes.

Can I use any other type of battery?

No, you should only use a CR2032 battery for this key fob.

What if the key fob doesn’t work after replacing the battery?

Ensure that the battery is inserted correctly with the positive side facing down. If it still doesn’t work, the key fob may have other issues.

Is this process the same for all Chevrolet Camaro models?

This guide is specifically for Chevrolet Camaro models from 2016 to 2021.

Can I use a pen or pencil instead of a screwdriver?

Yes, a pen or pencil can be used to lift the battery out if a screwdriver is not available.

How often should I replace the battery?

Battery life varies, but it’s a good idea to replace it when you notice the key fob is not working as well as it should.

Where can I buy a CR2032 battery?

You can purchase a CR2032 battery online or at most electronic stores.