Introduction
Replacing the battery in your Chevrolet City Express key fob might seem daunting, but it’s actually a straightforward process. In this guide, I’ll walk you through each step to ensure your key fob is back to working condition in no time.
This tutorial will take you less than five minutes and requires only a few tools. Let’s dive in!
- LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
- CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These authentic Panasonic lithium battery cells and packaging (in our “sunburst” package as shown) meet or exceed IEC 60086-4:2019; ANSI C18.3M Part 2:2024; CFR 16, Part 1700.20 and CFR 16, Part 1263 as required by Reese’s Law (Pub. L. 117-171, 15 U.S.C 2056e)
- LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored
Tools and Materials Needed
Before we start, you’ll need a couple of items:
- CR1620 coin battery
- Flathead screwdriver
- Precision Phillips head screwdriver
If you don’t have these tools, you can find them online. I recommend checking out the links provided to get the right battery and screwdriver set.
Step-by-Step Battery Replacement
Removing the Screw
The first step is to remove the small Phillips head screw located on the key fob. Use your precision screwdriver to carefully unscrew it. Set the screw aside in a safe place as you’ll need it later.
Opening the Key Fob
Next, take your flathead screwdriver and locate the small slot at the top of the device. Insert the flathead into the slot and twist it gently but firmly. This action will cause the key fob to crack open.
Be cautious while doing this to avoid damaging the casing. Once opened, set the top part of the key fob aside.
Removing the Old Battery
With the key fob open, you’ll see the old CR1620 battery. Use your precision screwdriver to carefully pry the battery out. Lift it gently from beneath and remove it from the casing.
Dispose of the old battery properly, following local regulations for battery disposal.
Inserting the New Battery
Take your new CR1620 battery and ensure the positive side (marked with a plus sign and text) is facing down. Place the battery into the slot and press it down until it clicks into place securely.
Reassembling the Key Fob
Before reassembling, check that the key insert is correctly positioned. It should fit snugly into its slot. If it’s not aligned correctly, it won’t fit properly and will sit at an awkward angle.
Once everything is aligned, place the top part of the key fob back onto the bottom part. Press them together until you hear them snap back into place.
Securing the Screw
Finally, take the small Phillips head screw you removed earlier and screw it back into place. Tighten it securely but be careful not to over-tighten, as this could strip the screw or damage the casing.
- LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
- CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These authentic Panasonic lithium battery cells and packaging (in our “sunburst” package as shown) meet or exceed IEC 60086-4:2019; ANSI C18.3M Part 2:2024; CFR 16, Part 1700.20 and CFR 16, Part 1263 as required by Reese’s Law (Pub. L. 117-171, 15 U.S.C 2056e)
- LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored
Conclusion
And there you have it! Your Chevrolet City Express key fob should now be working perfectly with its new battery. This simple process can save you both time and money compared to going to a dealership for a battery replacement.
If you found this guide helpful, please let me know in the comments or by giving this tutorial a like. For more key fob tutorials, visit our website at FobBattery.com.
FAQ
What type of battery does the Chevrolet City Express key fob use?
The Chevrolet City Express key fob uses a CR1620 coin battery.
How long does it take to replace the key fob battery?
The entire process should take less than five minutes.
Do I need any special tools to replace the battery?
Yes, you’ll need a flathead screwdriver and a precision Phillips head screwdriver.
Can I replace the battery myself, or should I go to a dealership?
You can easily replace the battery yourself by following this guide. There’s no need to visit a dealership.
What should I do if the key fob doesn’t work after replacing the battery?
Ensure the battery is inserted correctly with the positive side facing down. If it still doesn’t work, the key fob might have other issues requiring professional assistance.
Is it important to dispose of the old battery properly?
Yes, always follow local regulations for battery disposal to protect the environment.
How often should I replace the key fob battery?
Typically, the key fob battery should be replaced every 1-2 years, depending on usage.
Where can I buy the CR1620 battery?
You can purchase the CR1620 battery online, such as through Amazon.
- LONG LASTING PERFORMANCE: Panasonic CR1620 3.V batteries are engineered to provide reliable, long-lasting power
- CHILD RESISTANT SAFETY STANDARDS BASED PACKAGING: These authentic Panasonic lithium battery cells and packaging (in our “sunburst” package as shown) meet or exceed IEC 60086-4:2019; ANSI C18.3M Part 2:2024; CFR 16, Part 1700.20 and CFR 16, Part 1263 as required by Reese’s Law (Pub. L. 117-171, 15 U.S.C 2056e)
- LONG STORAGE LIFE: Our CR1620 batteries maintain power up to 8 years when unused and properly stored