Chevrolet Equinox Key Fob Battery Replacement (2010 – 2017)

Introduction

Replacing the battery in your Chevrolet Equinox key fob is a straightforward process that anyone can do in under five minutes. In this guide, I will walk you through each step to ensure your key fob is functioning properly again. You’ll need a CR2032 battery, which can be easily purchased online. I’ll also provide some tips and tricks to make the process even easier.

Required Tools and Materials

Before we get started, let’s gather the necessary tools and materials. Fortunately, you won’t need much:

• CR2032 battery
• Coin (optional)

That’s it! You can find the CR2032 battery online, and it’s quite affordable. If you don’t have a coin handy, you can still complete this process with just your fingers.

Types of Key Fobs

There are a few different versions of the Chevrolet Equinox key fob, including three-button, four-button, and five-button models. Regardless of which version you have, the battery replacement process is the same. Follow along, and you’ll have your key fob working again in no time.

Step-by-Step Instructions

Step 1: Flip Out the Internal Key

The first step is to flip out the internal key. This will give you better access to the back section of the key fob, which we need to remove to get to the battery.

Step 2: Remove the Back Section

Next, we’ll remove the back section of plastic. Hold the key fob with the key flipped out and locate the small lip on the inside of the key fob. Hold the stationary part of the key fob and push up on the lip. The back section should come off easily.

Using a Coin

If the back section is tight and difficult to remove, you can use a coin. Insert the coin into the gap at the bottom part of the key fob (not the top part). Twist the coin to start opening the key fob, and then you can pull the back section off with your fingers.

Step 3: Access the Battery

With the back section removed, you now have access to the battery. Locate the side of the battery with the plastic tab holding it in place. Push lightly next to the tab, and the battery will pop out.

Step 4: Insert the New Battery

Dispose of the old battery and ensure you have a new CR2032 battery. When inserting the new battery, make sure the positive side (with the text and plus sign) is facing up. Slide and push the battery into place.

Step 5: Reattach the Back Section

Finally, reattach the back section of the key fob. Click the plastic back into place, and you’re done!

Conclusion

That’s it! You’ve successfully replaced the battery in your Chevrolet Equinox key fob. This simple process can save you time and money compared to going to a dealership. If you found this guide helpful, feel free to let me know in the comments or give it a like. If you need assistance with other key fobs, visit our website for more guides.

Frequently Asked Questions (FAQ)

What type of battery does the Chevrolet Equinox key fob use?

The Chevrolet Equinox key fob uses a CR2032 battery.

Where can I buy a CR2032 battery?

You can buy a CR2032 battery online, often for just a few dollars.

Do I need any special tools to replace the battery?

No, you don’t need any special tools. A coin can be helpful but is not necessary.

Will this process work for all versions of the Chevrolet Equinox key fob?

Yes, this process works for three-button, four-button, and five-button versions of the Chevrolet Equinox key fob.

How long does it take to replace the battery?

Replacing the battery takes under five minutes.

What should I do if the back section is difficult to remove?

If the back section is tight, use a coin to help open it. Insert the coin into the gap and twist to start opening the key fob.

How do I know which side of the battery should face up?

The positive side of the battery, which has the text and plus sign, should face up when you insert it.

Can I find more guides for other key fobs?

Yes, visit our website for more guides on various key fobs from different makes and models.