Introduction
Replacing the battery in your Chevrolet Equinox key fob is a simple task that anyone can do. This guide will take you through the steps required to replace the internal battery of your key fob, specifically for the 2007, 2008, and 2009 models.
The process is quick and straightforward, taking less than five minutes. All you need is a flathead screwdriver and a CR2032 battery. Let’s get started!
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Tools and Materials Needed
Before you begin, ensure you have the following items:
- Flathead screwdriver
- CR2032 battery
Step-by-Step Instructions
Step 1: Locate the Seam
First, find the small indentation along the seam at the bottom of the key fob. This is where you will insert your flathead screwdriver.
Step 2: Insert the Screwdriver
Insert the flathead screwdriver into the indentation. Once you feel it catch, gently twist the screwdriver. This action will open the key fob.
Step 3: Open the Key Fob
After twisting the screwdriver, the key fob should crack open. Don’t worry if it starts to fall apart; that’s normal. Carefully hold the circuit board in place.
Step 4: Remove the Circuit Board
Gently pull the circuit board out of the key fob. Be careful not to remove the rubber component, as it should stay in place.
Step 5: Remove the Old Battery
Using the flathead screwdriver, push on the bottom of the old battery to loosen it. Once it’s loose, pull it out with your fingers.
Step 6: Insert the New Battery
Take your new CR2032 battery and ensure the positive side (marked with a “+” sign) is facing up. Slide the new battery into place.
Step 7: Reassemble the Key Fob
Place the circuit board back into the key fob, ensuring it sits correctly. Align the back section of the plastic casing and press it together until it clicks.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
And that’s it! You’ve successfully replaced the battery in your Chevrolet Equinox key fob. This simple task can save you time and money, as you won’t need to visit a dealership or a specialist.
If you found this guide helpful, feel free to share it with others who might benefit. For more information on key fob maintenance and other vehicle-related tips, visit our website at fobbattery.com.
Frequently Asked Questions (FAQ)
What type of battery does the Chevrolet Equinox key fob use?
The Chevrolet Equinox key fob uses a CR2032 battery.
Where can I purchase a CR2032 battery?
You can purchase a CR2032 battery online, such as on Amazon, or at most electronics or hardware stores.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
How long does the replacement process take?
The entire process takes less than five minutes.
Do I need any special tools?
No special tools are required. You only need a flathead screwdriver.
Can I use this guide for other models?
This guide is specifically for the 2007, 2008, and 2009 Chevrolet Equinox models. However, the process is similar for other models with the same key fob design.
What should I do if my key fob still doesn’t work after replacing the battery?
If your key fob still doesn’t work, ensure the battery is inserted correctly with the positive side facing up. If it still doesn’t work, the issue might be with the key fob itself, and you may need to consult a professional.
Is it safe to replace the battery myself?
Yes, replacing the battery yourself is safe and straightforward. Just follow the steps outlined in this guide.
How often should I replace the key fob battery?
The key fob battery typically lasts 1-2 years. Replace it when you notice a decrease in range or if the key fob stops working.