Chevrolet Equinox Key Fob Battery Replacement Guide (2007 – 2009)

Introduction

Replacing the battery in your Chevrolet Equinox key fob is a simple task that can be accomplished in less than five minutes. This guide will walk you through the steps to replace the internal battery in your key fob, ensuring it continues to function correctly.

What You Will Need

Before you begin, gather the necessary tools and materials:

• CR2032 battery
• Flathead screwdriver

You can purchase the CR2032 battery online. Click here to buy it from Amazon.

Locate the Seam

Start by examining the bottom of your key fob. You will see a seam in the plastic casing. This seam is where you will insert the flathead screwdriver to open the key fob.

Open the Key Fob

Insert the flathead screwdriver into the seam. Apply gentle pressure and wiggle the screwdriver to pry open the key fob. The casing should open without much force.

Once opened, the key fob may fall apart. This is normal and will make it easier to access the battery.

Remove the Old Battery

With the key fob open, locate the battery housed under a metal component. Gently push the battery out from under this housing and remove it.

Dispose of the old battery properly.

Insert the New Battery

Take your new CR2032 battery and ensure the positive side (marked with a plus sign) is facing up. Slide the new battery under the metal housing and push it into place.

Reassemble the Key Fob

Pick up the front piece of the key fob, which has the rubber part, and drop the circuit board back into place with the battery facing up.

Ensure the circuit board is seated correctly within the casing.

Close the Key Fob

Align the back piece of the key fob with the front and click them together. The casing should snap back into place securely.

Test the Key Fob

With the key fob reassembled, test it to ensure the new battery is functioning correctly. Your key fob should now be working as expected.

Conclusion

Replacing the battery in your Chevrolet Equinox key fob is a quick and easy process. By following these steps, you can save time and avoid the inconvenience of a non-working key fob.

If you found this guide helpful, please let us know in the comments or by giving this post a like. For more information and guides on key fob maintenance, visit our website at fobbattery.com.

FAQ

What type of battery does the Chevrolet Equinox key fob use?

The key fob uses a CR2032 coin battery.

Where can I buy a CR2032 battery?

You can purchase a CR2032 battery on Amazon.

Do I need any special tools to open the key fob?

You only need a flathead screwdriver to open the key fob.

How long does it take to replace the battery?

The entire process takes less than five minutes.

What should I do if the key fob doesn’t work after replacing the battery?

Ensure the battery is installed correctly with the positive side facing up. If it still doesn’t work, try another new battery or consult a professional.

Can I use a different type of battery?

No, you should use a CR2032 battery as it is the specified type for this key fob.

Is this guide applicable to other models?

This guide is specifically for Chevrolet Equinox models from 2007 to 2009. However, similar key fobs may use the same process.

Where can I find more guides like this?

Visit our website at fobbattery.com for more key fob maintenance guides.