Introduction
Replacing the battery in your Chevrolet Malibu key fob is a straightforward process that you can easily do at home. It will take you under five minutes from start to finish. This guide will walk you through each step, ensuring you have your key fob working like new in no time.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Tools and Materials Needed
To replace the battery in your key fob, you will need the following items:
- Flathead screwdriver
- CR2032 battery
If you don’t have a CR2032 battery on hand, you can purchase one from Amazon using the link provided in the description.
Step 1: Locate the Opening
The first step in opening your key fob is to find the small opening on the bottom right of the device. This opening is located next to where the key ring attaches. Look for a small slot along the seam of the key fob.
Step 2: Insert the Screwdriver
Take your flathead screwdriver and insert it into the slot. Wiggle the screwdriver gently to create an opening. If the key fob is particularly tight, you may need to twist the screwdriver slightly to make a small opening. Once you have a gap, you can pull the key fob apart.
Step 3: Remove the Circuit Board
When you open the key fob, you will see the circuit board inside. If the circuit board is still in the rubber housing, gently lift it out and set it aside. This will make it easier to access the battery.
Step 4: Remove the Old Battery
With the circuit board removed, you can easily push the old battery out from its metal housing. Dispose of the old battery properly.
Step 5: Insert the New Battery
Take your new CR2032 battery and ensure the positive side (the side with the text and plus sign) is facing up. Slide the battery into the metal housing and push it down until it is securely in place.
Step 6: Reassemble the Key Fob
Now that the new battery is in place, it’s time to reassemble the key fob. Place the circuit board back into the rubber housing, ensuring the battery is facing up. Line up the back section of the plastic and snap it back together.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
And that’s it! Your Chevrolet Malibu key fob should now be working perfectly with its new battery. This simple process can save you time and money compared to going to a dealership or a professional service.
FAQs
What type of battery does the Chevrolet Malibu key fob use?
The Chevrolet Malibu key fob uses a CR2032 coin battery.
Can I use a different type of battery?
No, it is recommended to use a CR2032 battery for proper functionality.
How often should I replace the key fob battery?
Key fob batteries typically last 1-2 years, but this can vary based on usage.
What if my key fob still doesn’t work after replacing the battery?
Ensure the battery is inserted correctly with the positive side facing up. If it still doesn’t work, there may be an issue with the key fob itself, and you may need professional assistance.
Where can I buy a CR2032 battery?
You can purchase a CR2032 battery from various online retailers, including Amazon.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Is it safe to replace the battery myself?
Yes, replacing the battery yourself is safe and easy as long as you follow the steps outlined in this guide.
Do I need any special tools?
No, you only need a flathead screwdriver to open the key fob and replace the battery.
Can I use this guide for other car models?
This guide is specifically for the Chevrolet Malibu (2004-2012). While other models may have similar processes, it’s best to refer to a guide specific to your car’s make and model.