Introduction
Replacing the battery in your Chevrolet Silverado key fob is a straightforward task that you can accomplish in under five minutes. Whether you have a three, four, five, or six-button key fob, the process is the same. In this guide, I will walk you through the steps to replace the battery efficiently and safely.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Tools and Materials Needed
Before you begin, make sure you have the following tools and materials:
- Flathead screwdriver
- CR2032 battery
If you don’t have a CR2032 battery, you can purchase one online. For convenience, here’s a link to buy the battery on Amazon: Buy CR2032 Battery.
Identifying Your Key Fob
Chevrolet Silverado key fobs come in various button configurations, but they all use the same CR2032 battery. Whether you have the three, four, five, or six-button version, the steps to replace the battery are identical.
Step-by-Step Battery Replacement
Follow these steps to replace the battery in your Chevrolet Silverado key fob:
Step 1: Locate the Key Ring Slot
Flip your key fob over and locate the slot where the key ring attaches. This slot is where you will insert your flathead screwdriver.
Step 2: Remove the Back Cover
Insert your flathead screwdriver into the slot and twist it like a key. This will pop off the back section of the plastic cover. You may need to twist in both directions to fully detach the cover.
Step 3: Remove the Old Battery
Once the back cover is removed, you will see the battery. Use your flathead screwdriver to gently pry the battery out of its compartment. Be careful to avoid breaking any plastic pieces that hold the battery in place.
In some cases, the battery may fall out easily, especially if the plastic pieces that hold it are broken. If this happens, don’t worry; the battery will still function correctly.
Step 4: Insert the New Battery
Take your new CR2032 battery and ensure the positive side (marked with a plus sign) is facing up. Slide it under the larger tab of plastic first, then click it down under the smaller tab.
Step 5: Reattach the Back Cover
Snap the back piece of plastic back onto the key fob. Ensure both sides are securely attached.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Conclusion
That’s it! Your key fob should now be working perfectly with the new battery. If you found this guide helpful, feel free to leave a comment or like the post. For more tutorials on key fobs for other makes and models, visit our website at fobbattery.com.
FAQ
What type of battery does the Chevrolet Silverado key fob use?
The Chevrolet Silverado key fob uses a CR2032 battery.
Is it difficult to replace the battery myself?
No, replacing the battery is easy and takes less than five minutes. All you need is a flathead screwdriver and a CR2032 battery.
What if a piece of plastic breaks during the process?
If a small plastic piece breaks, the battery will still function correctly. Just be careful when prying the battery out to avoid breaking any plastic.
Do all button configurations of the key fob use the same battery?
Yes, all button configurations (three, four, five, or six-button) of the Chevrolet Silverado key fob use the CR2032 battery.
Where can I buy a CR2032 battery?
You can purchase a CR2032 battery online, such as on Amazon.
- Plastic, Metal
- Imported
- IN THE BOX: 4-pack of CR2032 3 volt lithium coin cell batteries; replacement for BR2032, DL2032, and ECR2032
Can I find more key fob tutorials online?
Yes, for more tutorials on key fobs for different makes and models, visit our website at fobbattery.com.